[PATCH v6 2/4] PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed

[Johan Hovold]

On Wed, Sep 04, 2024 at 12:41:58PM +0530, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> 
> Currently, dw_pcie::max_link_speed has a valid value only if the controller
> driver restricts the maximum link speed in the driver or if the platform
> does so in the devicetree using the 'max-link-speed' property.
> 
> But having the maximum supported link speed of the platform would be
> helpful for the vendor drivers to configure any link specific settings.
> So in the case of non-valid value in dw_pcie::max_link_speed, just cache
> the hardware default value from Link Capability register.
> 
> While at it, let's also remove the 'max_link_speed' argument to the
> dw_pcie_link_set_max_speed() function since the value can be retrieved
> within the function.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 18 ++++++++++++++----
>  1 file changed, 14 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 86c49ba097c6..0704853daa85 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -687,16 +687,27 @@ void dw_pcie_upconfig_setup(struct dw_pcie *pci)
>  }
>  EXPORT_SYMBOL_GPL(dw_pcie_upconfig_setup);
>  
> -static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 max_link_speed)
> +static void dw_pcie_link_set_max_speed(struct dw_pcie *pci)
>  {
>  	u32 cap, ctrl2, link_speed;
>  	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  
>  	cap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> +
> +	/*
> +	 * Even if the platform doesn't want to limit the maximum link speed,
> +	 * just cache the hardware default value so that the vendor drivers can
> +	 * use it to do any link specific configuration.
> +	 */
> +	if (pci->max_link_speed < 0) {

This should be 

	if (pci->max_link_speed < 1) {

but the patch works as-is because of the default case in the switch
below which falls back to PCI_EXP_LNKCAP_SLS.

> +		pci->max_link_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, cap);
> +		return;
> +	}
> +
>  	ctrl2 = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
>  	ctrl2 &= ~PCI_EXP_LNKCTL2_TLS;
>  
> -	switch (pcie_link_speed[max_link_speed]) {
> +	switch (pcie_link_speed[pci->max_link_speed]) {
>  	case PCIE_SPEED_2_5GT:
>  		link_speed = PCI_EXP_LNKCTL2_TLS_2_5GT;
>  		break;

> @@ -1058,8 +1069,7 @@ void dw_pcie_setup(struct dw_pcie *pci)
>  {
>  	u32 val;
>  
> -	if (pci->max_link_speed > 0)
> -		dw_pcie_link_set_max_speed(pci, pci->max_link_speed);
> +	dw_pcie_link_set_max_speed(pci);

With the above fixed:

Reviewed-by: Johan Hovold <johan+linaro at kernel.org>