[PATCH v6 07/13] PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific

[Bjorn Helgaas]

On Thu, Aug 15, 2024 at 06:57:20PM -0400, Jim Quinlan wrote:
> Do prepatory work for the 7712 SoC, which is introduced in a future commit.
> Our HW design has changed two register offsets for the 7712, where
> previously it was a common value for all Broadcom SOCs with PCIe cores.
> Specifically, the two offsets are to the registers HARD_DEBUG and
> INTR2_CPU_BASE.

> @@ -1499,12 +1502,16 @@ static const int pcie_offsets[] = {
>  	[RGR1_SW_INIT_1] = 0x9210,
>  	[EXT_CFG_INDEX]  = 0x9000,
>  	[EXT_CFG_DATA]   = 0x9004,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
>  };
>  
>  static const int pcie_offsets_bmips_7425[] = {
>  	[RGR1_SW_INIT_1] = 0x8010,
>  	[EXT_CFG_INDEX]  = 0x8300,
>  	[EXT_CFG_DATA]   = 0x8304,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
>  };
>  
>  static const struct pcie_cfg_data generic_cfg = {
> @@ -1539,6 +1546,8 @@ static const int pcie_offset_bcm7278[] = {
>  	[RGR1_SW_INIT_1] = 0xc010,
>  	[EXT_CFG_INDEX] = 0x9000,
>  	[EXT_CFG_DATA] = 0x9004,
> +	[PCIE_HARD_DEBUG] = 0x4204,
> +	[PCIE_INTR2_CPU_BASE] = 0x4300,
>  };

What's the organization scheme here?  We now have:

  static const int pcie_offsets[] = { ... };
  static const int pcie_offsets_bmips_7425[] = { ... };
  static const int pcie_offset_bcm7712[] = { ... };

  static const struct pcie_cfg_data generic_cfg = { ... };
  static const struct pcie_cfg_data bcm7425_cfg = { ... };
  static const struct pcie_cfg_data bcm7435_cfg = { ... };
  static const struct pcie_cfg_data bcm4908_cfg = { ... };

  static const int pcie_offset_bcm7278[] = { ... };

  static const struct pcie_cfg_data bcm7278_cfg = { ... };
  static const struct pcie_cfg_data bcm2711_cfg = { ... };
  static const struct pcie_cfg_data bcm7216_cfg = { ... };
  static const struct pcie_cfg_data bcm7712_cfg = { ... };

So we have pcie_offsets_bmips_7425[] and pcie_offset_bcm7712[] (with
gratuituously different "offset" vs "offsets") which are all together
before the pcie_cfg_data.

Then we have pcie_offset_bcm7278[] (again gratuitously different
"offset") separately, next to bcm7278_cfg.

It would be nice to pick one scheme and stick to it.

Also a seemingly random order of the pcie_cfg_data structs and
.compatible strings.

Also a little confusing to have "bmips_7425" and "bcm7425" associated
with the same chip.  I suppose there's historical reason for it, but I
don't think it's helpful in this usage.

>  static const struct pcie_cfg_data bcm7278_cfg = {
> -- 
> 2.17.1
>