[PATCH v1 1/5] gpio: stmpe: Fix IRQ related error messages

[Andy Shevchenko]

First of all, remove duplicate message that platform_get_irq()
does already print. Second, correct the error message when unable
to register a handler, which is broken in two ways:
1) the misleading 'get' vs. 'register';
2) missing '\n' at the end.

(Yes, for the curious ones, the dev_*() cases do not require '\n'
and issue it automatically, but it's better to have them explicit)

Fix all this here.

Fixes: 1882e769362b ("gpio: stmpe: Simplify with dev_err_probe()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
 drivers/gpio/gpio-stmpe.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c
index abd42a975b09..4e171f9075bf 100644
--- a/drivers/gpio/gpio-stmpe.c
+++ b/drivers/gpio/gpio-stmpe.c
@@ -464,6 +464,7 @@ static void stmpe_gpio_disable(void *stmpe)
 
 static int stmpe_gpio_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *np = pdev->dev.of_node;
 	struct stmpe_gpio *stmpe_gpio;
@@ -493,12 +494,6 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 	of_property_read_u32(np, "st,norequest-mask",
 			&stmpe_gpio->norequest_mask);
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		dev_info(&pdev->dev,
-			"device configured in no-irq mode: "
-			"irqs are not available\n");
-
 	ret = stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
 	if (ret)
 		return ret;
@@ -507,6 +502,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	irq = platform_get_irq(pdev, 0);
 	if (irq > 0) {
 		struct gpio_irq_chip *girq;
 
@@ -514,8 +510,7 @@ static int stmpe_gpio_probe(struct platform_device *pdev)
 				stmpe_gpio_irq, IRQF_ONESHOT,
 				"stmpe-gpio", stmpe_gpio);
 		if (ret)
-			return dev_err_probe(&pdev->dev, ret,
-					     "unable to get irq");
+			return dev_err_probe(dev, ret, "unable to register IRQ handler\n");
 
 		girq = &stmpe_gpio->chip.irq;
 		gpio_irq_chip_set_chip(girq, &stmpe_gpio_irq_chip);
-- 
2.43.0.rc1.1336.g36b5255a03ac