[PATCH 1/2] arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon

[Dhruva Gole]

Add another entry in the wkup_conf for the syscon node, and then use
that for the syscon in opp-table.

Marking entire wkup_conf as "syscon", "simple-mfd" is wrong and needs to
be addressed similar to how other child-nodes in wkup_conf are implemented
in the same file.

Signed-off-by: Dhruva Gole <d-gole at ti.com>
---

This patch was sent previously here [1]. However there were some fixes
needed in the driver to make it work which have to go in as well. The
dependencies have been mentioned in the coverletter and a driver patch
that needs to go in after this patch is included as part of this series
itself.

[1] https://lore.kernel.org/all/20240827080007.2097276-1-d-gole@ti.com/

Cc: Bryan Brattlof <bb at ti.com>
Cc: Vignesh Raghavendra <vigneshr at ti.com>
Cc: Vibhore Vardhan <vibhore at ti.com>

---
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 7 ++++++-
 arch/arm64/boot/dts/ti/k3-am625.dtsi       | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index e0afafd532a5..b2b65e31c7cf 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -10,7 +10,7 @@
 &cbass_wakeup {
 	wkup_conf: syscon at 43000000 {
 		bootph-all;
-		compatible = "syscon", "simple-mfd";
+		compatible = "simple-bus";
 		reg = <0x00 0x43000000 0x00 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -22,6 +22,11 @@ chipid: chipid at 14 {
 			reg = <0x14 0x4>;
 		};
 
+		opp_efuse_table: syscon at 18 {
+			compatible = "ti,am62-opp-efuse-table", "syscon";
+			reg = <0x18 0x4>;
+		};
+
 		cpsw_mac_syscon: ethernet-mac-syscon at 200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi
index c3d1db47dc9f..c249883a8a8d 100644
--- a/arch/arm64/boot/dts/ti/k3-am625.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -108,7 +108,7 @@ cpu3: cpu at 3 {
 	a53_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		opp-shared;
-		syscon = <&wkup_conf>;
+		syscon = <&opp_efuse_table>;
 
 		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
-- 
2.34.1