[PATCH] arm64: dts: ti: k3-am69-sk: Update OSPI partitions offsets
Prasanth Mantena
p-mantena at ti.com
Sun Sep 1 23:01:20 PDT 2024
On 20:38-20240830, Beleswar Prasad Padhi wrote:
>
> On 30-08-2024 14:52, Nishanth Menon wrote:
> > On 14:37-20240830, Beleswar Padhi wrote:
> > > OSPI NOR flash was partitioned with a size of 1 MB for the initial
> > > bootloader ("ospi.tiboot3"). On the AM69-SK board, boot failures were
> > > sometimes observed when the initial bootloader size exceeded 512 KB. To
> > Why does the boot fail when > 512MB?
>
>
> It is a limitation by BOOT ROM where it can not bring up the initial
> bootloader when its size exceeds 512 KB in the DFU boot mode.
>
> >
> > > address this, the initial bootloader image has been optimized to be
> > > smaller than 512 KB.
> > >
> > > Therefore, limit the first OSPI partition size to 512 KB and adjust the
> > > remaining size across the subsequent partitions.
> > I am NOT a fan of redoing flash partition organization of platforms that
> > are already in production - all kinds of ecosystem messes happen as a
> > result. Alternatively - give the 512K to u-boot tispl partition and
> > leave all others as is - this will at least allow people's current env
> > to be retained.
>
>
> This sounds good to me. I will let Prasanth comment over this.
>
We can align things in u-boot level rather than changing anything here.
This patch can be dropped Beleswar.
> >
> > > Signed-off-by: Beleswar Padhi <b-padhi at ti.com>
> > > ---
> > > arch/arm64/boot/dts/ti/k3-am69-sk.dts | 18 +++++++++---------
> > > 1 file changed, 9 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
> > > index 1e36965a1403..641236918379 100644
> > > --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
> > > +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
> > > @@ -1241,27 +1241,27 @@ partitions {
> > > partition at 0 {
> > > label = "ospi.tiboot3";
> > > - reg = <0x0 0x100000>;
> > > + reg = <0x0 0x80000>;
> > > };
> > > - partition at 100000 {
> > > + partition at 80000 {
> > > label = "ospi.tispl";
> > > - reg = <0x100000 0x200000>;
> > > + reg = <0x80000 0x200000>;
> > > };
> > > - partition at 300000 {
> > > + partition at 280000 {
> > > label = "ospi.u-boot";
> > > - reg = <0x300000 0x400000>;
> > > + reg = <0x280000 0x400000>;
> > > };
> > > - partition at 700000 {
> > > + partition at 680000 {
> > > label = "ospi.env";
> > > - reg = <0x700000 0x40000>;
> > > + reg = <0x680000 0x40000>;
> > > };
> > > - partition at 740000 {
> > > + partition at 6c0000 {
> > > label = "ospi.env.backup";
> > > - reg = <0x740000 0x40000>;
> > > + reg = <0x6c0000 0x40000>;
> > > };
> > > partition at 800000 {
> > > --
> > > 2.34.1
> > >
More information about the linux-arm-kernel
mailing list