[PATCH v2 08/15] iio: accel: mma9551: use bool for event state

[Julien Stephan]

Since the write_event_config callback now uses a bool for the state
parameter, update the signature of the function it calls accordingly,
and use a bool array for event_enabled.

Signed-off-by: Julien Stephan <jstephan at baylibre.com>
---
 drivers/iio/accel/mma9551.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/accel/mma9551.c b/drivers/iio/accel/mma9551.c
index 605022f5239a6412827f4ba059aa18d490908720..6d73eec951263956f314f82542becbbae933de91 100644
--- a/drivers/iio/accel/mma9551.c
+++ b/drivers/iio/accel/mma9551.c
@@ -45,7 +45,7 @@ enum mma9551_tilt_axis {
 struct mma9551_data {
 	struct i2c_client *client;
 	struct mutex mutex;
-	int event_enabled[3];
+	bool event_enabled[3];
 	int irqs[MMA9551_GPIO_COUNT];
 };
 
@@ -162,7 +162,7 @@ static int mma9551_read_event_config(struct iio_dev *indio_dev,
 
 static int mma9551_config_incli_event(struct iio_dev *indio_dev,
 				      enum iio_modifier axis,
-				      int state)
+				      bool state)
 {
 	struct mma9551_data *data = iio_priv(indio_dev);
 	enum mma9551_tilt_axis mma_axis;
@@ -174,7 +174,7 @@ static int mma9551_config_incli_event(struct iio_dev *indio_dev,
 	if (data->event_enabled[mma_axis] == state)
 		return 0;
 
-	if (state == 0) {
+	if (!state) {
 		ret = mma9551_gpio_config(data->client,
 					  (enum mma9551_gpio_pin)mma_axis,
 					  MMA9551_APPID_NONE, 0, 0);

-- 
2.47.0