[PATCH v2 08/13] clk: sunxi-ng: a100: enable MMC clock reparenting

[Cody Eksal]

During testing, it was noted that MMC would fail to initialize, with
"mmc: fatal err update clk timeout" being printed in the log. It was
found that CLK_SET_RATE_NO_REPARENT was set on the MMC controllers, and
that removing this allows MMC to initialize. Therefore, remove
CLK_SET_RATE_NO_REPARENT from mmc0/1/2.

Signed-off-by: Cody Eksal <masterr3c0rd at epochal.quest>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
index bbaa82978716..a59e420b195d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a100.c
@@ -436,7 +436,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
 					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
-					  CLK_SET_RATE_NO_REPARENT);
+					  0);
 
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
 					  0, 4,		/* M */
@@ -444,7 +444,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
 					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
-					  CLK_SET_RATE_NO_REPARENT);
+					  0);
 
 static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
 					  0, 4,		/* M */
@@ -452,7 +452,7 @@ static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
 					  24, 2,	/* mux */
 					  BIT(31),	/* gate */
 					  2,		/* post-div */
-					  CLK_SET_RATE_NO_REPARENT);
+					  0);
 
 static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
 static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
-- 
2.47.0