[PATCH 0/9] ARM: dts: st: add WLAN/BT on disco boards

[Alexandre TORGUE]

Hi Valentin

On 8/27/24 16:04, Valentin Caron wrote:
> This series enable WLAN/BT module on stm32mp1x discovery boards.
> Use LSCO from RTC to supply 32kHz clock to WLAN/BT modules.
> This is done by selecting "rtc_lsco_pins_a" in the WLAN pinctrl node.
> 
> And also add RTC nodes on stm32mp25x to enable RTC on stm32mp257f-ev1
> board.
> 
> Christophe Roullier (2):
>    ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
>    ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
> 
> Valentin Caron (7):
>    ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
>    ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
>    ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
>    ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
>    arm64: dts: st: add RTC on stm32mp25x
>    arm64: dts: st: enable RTC on stm32mp257f-ev1 board
>    ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp25
> 
>   arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi   |  7 +++
>   arch/arm/boot/dts/st/stm32mp135f-dk.dts       | 52 +++++++++++++++++++
>   arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi   |  7 +++
>   arch/arm/boot/dts/st/stm32mp157c-dk2.dts      | 51 +++++++++++++++++-
>   arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi |  6 +++
>   arch/arm64/boot/dts/st/stm32mp251.dtsi        | 10 ++++
>   arch/arm64/boot/dts/st/stm32mp257f-ev1.dts    |  4 ++
>   7 files changed, 136 insertions(+), 1 deletion(-)
> 

I applied the series by removing patch[9] as it raised a build issue.
Furthermore, the pin pin configuration in patch [9] was not used in a 
board, so no need to take it.

Regards
Alex