[PATCH v7 7/7] PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support

Frank Li Frank.Li at nxp.com
Tue Oct 29 09:36:40 PDT 2024


Add support for i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe
Endpoint (EP). On i.MX8Q platforms, the PCI bus addresses differ from the
CPU addresses. The DesignWare (DWC) driver already handles this in the
common code.

Reviewed-by: Richard Zhu <hongxing.zhu at nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
Chagne from v3 to v7
- none
change from v2 to v3
- add Mani's review tag
- Add pci->using_dtbus_info = true;
---
 drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 8102a02a00b38..94f3411352bf0 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -70,6 +70,7 @@ enum imx_pcie_variants {
 	IMX8MQ_EP,
 	IMX8MM_EP,
 	IMX8MP_EP,
+	IMX8Q_EP,
 	IMX95_EP,
 };
 
@@ -1061,6 +1062,16 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
 	.align = SZ_64K,
 };
 
+static const struct pci_epc_features imx8q_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.bar[BAR_1] = { .type = BAR_RESERVED, },
+	.bar[BAR_3] = { .type = BAR_RESERVED, },
+	.bar[BAR_5] = { .type = BAR_RESERVED, },
+	.align = SZ_64K,
+};
+
 /*
  * BAR#	| Default BAR enable	| Default BAR Type	| Default BAR Size	| BAR Sizing Scheme
  * ================================================================================================
@@ -1627,6 +1638,14 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.epc_features = &imx8m_pcie_epc_features,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
+	[IMX8Q_EP] = {
+		.variant = IMX8Q_EP,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
+		.mode = DW_PCIE_EP_TYPE,
+		.epc_features = &imx8q_pcie_epc_features,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95_EP] = {
 		.variant = IMX95_EP,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES |
@@ -1656,6 +1675,7 @@ static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
 	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+	{ .compatible = "fsl,imx8q-pcie-ep", .data = &drvdata[IMX8Q_EP], },
 	{ .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
 	{},
 };

-- 
2.34.1




More information about the linux-arm-kernel mailing list