[PATCH 2/3] perf/dwc_pcie: Load DesignWare PCIe PMU driver automatically on Ampere SoCs

[Ilkka Koskinen]

On Mon, 28 Oct 2024, Will Deacon wrote:
> On Thu, Oct 24, 2024 at 03:19:17PM -0700, Ilkka Koskinen wrote:
>>
>> Hi Will,
>>
>> On Thu, 24 Oct 2024, Will Deacon wrote:
>>> On Tue, Oct 08, 2024 at 11:18:23PM +0000, Ilkka Koskinen wrote:
>>>> Load DesignWare PCIe PMU driver automatically if the system has a PCI
>>>> bridge by Ampere.
>>>>
>>>> Signed-off-by: Ilkka Koskinen <ilkka at os.amperecomputing.com>
>>>> ---
>>>>  drivers/perf/dwc_pcie_pmu.c | 10 ++++++++++
>>>>  1 file changed, 10 insertions(+)
>>>>
>>>> diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c
>>>> index 3581d916d851..d752168733cf 100644
>>>> --- a/drivers/perf/dwc_pcie_pmu.c
>>>> +++ b/drivers/perf/dwc_pcie_pmu.c
>>>> @@ -782,6 +782,16 @@ static void __exit dwc_pcie_pmu_exit(void)
>>>>  module_init(dwc_pcie_pmu_init);
>>>>  module_exit(dwc_pcie_pmu_exit);
>>>>
>>>> +static const struct pci_device_id dwc_pcie_pmu_table[] = {
>>>> +	{
>>>> +		PCI_DEVICE(PCI_VENDOR_ID_AMPERE, PCI_ANY_ID),
>>>> +		.class		= PCI_CLASS_BRIDGE_PCI_NORMAL,
>>>> +		.class_mask	= ~0,
>>>> +	},
>>>> +	{ }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(pci, dwc_pcie_pmu_table);
>>>
>>> Hmm, won't this only work if the driver is modular? Should we be calling
>>> pci_register_driver() for the builtin case?
>>
>> That would be the normal case indeed. However, this driver is quite
>> different: dwc_pcie_pmu_init() goes through all the pci devices looking for
>> root ports with the pmu capabilities. Moreover, the probe function isn't
>> bound to any specific vendor/class/device IDs. This patch simply makes sure
>> the driver is loaded and the init function gets called, if the driver was
>> built as module and ran on Ampere system.
>
> Ok, but that seems like the wrong approach, no? We end up with a weird
> list of vendors who want the thing to probe on their SoCs and, by
> omission, everybody not on the list doesn't want that behaviour.

Ideally, dwc pmu driver would claim the supported root ports but I think 
the PCIe driver is doing that. How about if we simply drop the auto 
loading patch and let users to manually load the driver as they have been 
doing so far?

Cheers, Ilkka

>
> Will
>