[RFC PATCH 01/10] dt-bindings: soc: imx-blk-ctrl: add 'fsl,power-domains-boot-on' property

[Dario Binacchi]

This property lists the state of the power domains, indicating whether
they have been left on or off by the bootloader/firmware.
This information becomes relevant, for example, in the case of supporting
the simple framebuffer.

Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

 .../bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml       | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
index eeec9965b091..00aa0b8d8ea9 100644
--- a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml
@@ -56,6 +56,15 @@ properties:
       - const: csi-aclk
       - const: csi-pclk
 
+  fsl,power-domains-boot-on:
+    description: |
+      Provide the on/off (1/0) status of the power domains. It allows
+      specifying whether one or more power domains have already been
+      initialized and left powered on by the bootloader.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 5
+    maxItems: 5
+
 required:
   - compatible
   - reg
-- 
2.43.0