[PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
Andrea della Porta
andrea.porta at suse.com
Sun Oct 27 04:15:28 PDT 2024
Hi Herve,
On 18:32 Wed 23 Oct , Herve Codina wrote:
> Hi Andrea,
>
>
> On Wed, 23 Oct 2024 17:36:06 +0200
> Andrea della Porta <andrea.porta at suse.com> wrote:
>
> > Hi Stephen,
> >
> > On 15:08 Wed 09 Oct , Stephen Boyd wrote:
> > > Quoting Andrea della Porta (2024-10-07 05:39:51)
> > > > diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> > > > index 299bc678ed1b..537019987f0c 100644
> > > > --- a/drivers/clk/Kconfig
> > > > +++ b/drivers/clk/Kconfig
> > > > @@ -88,6 +88,15 @@ config COMMON_CLK_RK808
> > > > These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
> > > > Clkout1 is always on, Clkout2 can off by control register.
> > > >
> > > > +config COMMON_CLK_RP1
> > > > + tristate "Raspberry Pi RP1-based clock support"
> > > > + depends on PCI || COMPILE_TEST
> > >
> > > A better limit would be some ARCH_* config.
> >
> > I've avoided ARCH_BCM2835 since the original intention is for this driver
> > to work (in the future) also for custom PCI cards with RP1 on-board, and not
> > only for Rpi5.
>
> Maybe depends on CONFIG_MISC_RP1 ?
> CONFIG_MISC_RP1 enables the RP1 PCI driver
Yep, seems the most logical one, thanks.
Regards,
Andrea
>
> Best regards,
> Hervé
More information about the linux-arm-kernel
mailing list