[PATCH] perf arm-spe: Add support for SPE Data Source packet on AmpereOne

[James Clark]

On 25/10/2024 12:30 am, Ilkka Koskinen wrote:
> Decode SPE Data Source packets on AmpereOne. The field is IMPDEF.
> 
> Signed-off-by: Ilkka Koskinen <ilkka at os.amperecomputing.com>
> ---
>   .../util/arm-spe-decoder/arm-spe-decoder.h    |  9 +++
>   tools/perf/util/arm-spe.c                     | 61 +++++++++++++++++++
>   2 files changed, 70 insertions(+)
> 
> diff --git a/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h b/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h
> index 1443c28545a9..e4115b1e92b2 100644
> --- a/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h
> +++ b/tools/perf/util/arm-spe-decoder/arm-spe-decoder.h
> @@ -67,6 +67,15 @@ enum arm_spe_neoverse_data_source {
>   	ARM_SPE_NV_DRAM		 = 0xe,
>   };
>   
> +enum arm_spe_ampereone_data_source {
> +	ARM_SPE_AMPEREONE_LOCAL_CHIP_CACHE_OR_DEVICE	= 0x0,
> +	ARM_SPE_AMPEREONE_SLC				= 0x3,
> +	ARM_SPE_AMPEREONE_REMOTE_CHIP_CACHE		= 0x5,
> +	ARM_SPE_AMPEREONE_DDR				= 0x7,
> +	ARM_SPE_AMPEREONE_L1D				= 0x8,
> +	ARM_SPE_AMPEREONE_L2D				= 0x9,
> +};
> +
>   struct arm_spe_record {
>   	enum arm_spe_sample_type type;
>   	int err;
> diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
> index 138ffc71b32d..04bd21ad7ea8 100644
> --- a/tools/perf/util/arm-spe.c
> +++ b/tools/perf/util/arm-spe.c
> @@ -515,10 +515,69 @@ static void arm_spe__synth_data_source_generic(const struct arm_spe_record *reco
>   		data_src->mem_lvl |= PERF_MEM_LVL_REM_CCE1;
>   }
>   
> +static const struct midr_range ampereone_source_spe[] = {
> +	MIDR_ALL_VERSIONS(MIDR_AMPERE1A),
> +	{},
> +};
> +
> +static void arm_spe__synth_data_source_ampereone(const struct arm_spe_record *record,
> +						 union perf_mem_data_src *data_src,
> +						 u64 midr)
> +{
> +	if (!is_midr_in_range_list(midr, ampereone_source_spe)) {
> +		arm_spe__synth_data_source_generic(record, data_src);
> +		return;
> +	}
[...]
>   static u64 arm_spe__synth_data_source(const struct arm_spe_record *record, u64 midr)
>   {
>   	union perf_mem_data_src	data_src = { .mem_op = PERF_MEM_OP_NA };
>   	bool is_neoverse = is_midr_in_range_list(midr, neoverse_spe);
> +	bool is_ampereone = (read_cpuid_implementor() == ARM_CPU_IMP_AMPERE);
>   

Hi Ilkka,

I think this read_cpuid_implementor() is for the device that's running 
report, rather than record. You need to use the midr that's saved into 
the file.

But it looks like you've done that for is_midr_in_range_list(midr, 
ampereone_source_spe) above. Is it possible to just do that and not 
read_cpuid_implementor() and then it's done the same way as neoverse and 
also works off target?

Thanks

James