[PATCH v16 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
Bibek Kumar Patro
quic_bibekkum at quicinc.com
Wed Oct 23 12:07:24 PDT 2024
Hi Rob,
Just wanted to check if anything else need to be addressed here to gain
further attention on this series.
Thanks & regards,
Bibek
On 10/8/2024 6:24 PM, Bibek Kumar Patro wrote:
> This patch series consist of six parts and covers the following:
>
> 1. Re-enable context caching for Qualcomm SoCs to retain prefetcher
> settings during reset and runtime suspend.
>
> 2. Remove cfg inside qcom_smmu structure and replace it with single
> pointer to qcom_smmu_match_data avoiding replication of multiple
> members from same.
>
> 3. Add support for ACTLR PRR bit setup via adreno-smmu-priv interface.
>
> 4. Introduce intital set of driver changes to implement ACTLR register
> for custom prefetcher settings in Qualcomm SoCs.
>
> 5. Add ACTLR data and support for qcom_smmu_500.
>
> Changes in v16 from v15:
> - Incorporate Dimitry's suggestion on patch 4/5 to use dev_dbg instead of dev_notice.
> - Fix kernel test robot warning [1] coming for 32bit architecture configuration.
> - Updatingthe tags
> [1]: https://lore.kernel.org/all/202409230343.Q8KnYl2w-lkp@intel.com/
> Link to v15:
> https://lore.kernel.org/all/20240920155813.3434021-1-quic_bibekkum@quicinc.com/
>
> Changes in v15 from v14:
> - As discussed with Robin and Dmitry modify the actlr table and logic to use
> compatible string instead of sid, mask for device matching which is
> similar to qcom_smmu_client_of_match mechanism.
> - Expand the comment in qcom_smmu500_reset to document reason why CPRE bit is re-enabled again
> after arm_mmu500_reset resets the bit.
> - Rearrange the series in order to keep prefetch setting patches in the end.
> Link to v14:
> https://lore.kernel.org/all/20240816174259.2056829-1-quic_bibekkum@quicinc.com/
>
> Changes in v14 from v13:
> Patch 6/6:
> - As discussed incorprate changes to carry out PRR implementation only for
> targets based on MMU-500 by using compat string based SMMU version detection.
> - Split the set_actlr interface into two separate interface namely set_prr_bit
> and set_prr_addr to set the prr enable bit and prr page address resepectively.
> Patch 3/6:
> - Fix a bug in gfx actlr_config which is uncovered while testing the gfx actlr setting in sc7280
> during PRR experiment which prevented clients on certain sids of gfx smmmu to be skipped during
> setting up of the ACTLR values : Fix involves swapping the arguments passed in smr_is_subset to make
> device smr <from devicetree> a subset of actlr_config table entries < defined in the driver>.
> Patch 4/6, 5/6:
> - Sort the actlr table values in increasing order of the SIDs.
> Link to v13:
> https://lore.kernel.org/all/20240628140435.1652374-1-quic_bibekkum@quicinc.com/
>
> Changes in v13 from v12:
> - Fix the compilation issues reported by kernel test robot [1].
> [1]: https://lore.kernel.org/all/202406281241.xEX0TWjt-lkp@intel.com/#t
> Link to v12:
> https://lore.kernel.org/all/20240626143020.3682243-1-quic_bibekkum@quicinc.com/
>
> Changes in v12 from v11:
> Changes to incorporate suggestion from Rob:
> - Fix the set and reset logic for prr bit as pointed out in v11-6/6.
> - Rename set_actlr_bit function name to set_prr.
> - Add extension for PRR name as Partially-Resident-Region in comments
> for set_prr function.
> - Add few missing sids for sc7280 in patch-5/6.
> Link to v11:
> https://lore.kernel.org/all/20240605121713.3596499-1-quic_bibekkum@quicinc.com/
>
> Changes in v11 from v10:
> - Include a new patch 6/6 to add support for ACTLR PRR bit
> through adreno-smmu-priv interface as suggested by Rob and Dmitry.
> Link to v10:
> https://lore.kernel.org/all/20240524131800.2288259-1-quic_bibekkum@quicinc.com/
>
> Changes in v10 from v9:
> - Added reviewed-by tags 1/5,2/5,3/5.
> Changes incorporated:
> - Remove redundant PRR bit setting from gfx actlr table(patch 4/5,5/5)
> as this bit needs special handling in the gfx driver along with
> the associated register settings.
> Link to discussion on PRR bit:
> https://lore.kernel.org/all/f2222714-1e00-424e-946d-c314d55541b8@quicinc.com/
> Link to v9:
> https://lore.kernel.org/all/20240123144543.9405-1-quic_bibekkum@quicinc.com/
>
> Changes in v9 from v8:
> Changes to incorporate suggestions from Konrad as follows:
> - Re-wrap struct members of actlr_variant in patch 4/5,5/5
> in a cleaner way.
> - Move actlr_config members to the header.
> Link to v8:
> https://lore.kernel.org/all/20240116150411.23876-1-quic_bibekkum@quicinc.com/
>
> Changes in v8 from v7:
> - Added reviewed-by tags on patch 1/5, 2/5.
> Changes to incorporate suggestions from Pavan and Konrad:
> - Remove non necessary extra lines.
> - Use num_smmu and num_actlrcfg to store the array size and use the
> same to traverse the table and save on sentinel space along with
> indentation levels.
> - Refactor blocks containing qcom_smmu_set_actlr to remove block
> repetition in patch 3/5.
> - Change copyright year from 2023 to 2022-2023 in patch 3/5.
> - Modify qcom_smmu_match_data.actlrvar and actlr_variant.actlrcfg to
> const pointer to a const resource.
> - use C99 designated initializers and put the address first.
> Link to v7:
> https://lore.kernel.org/all/20240109114220.30243-1-quic_bibekkum@quicinc.com/
>
> Changes in v7 from v6:
> Changes to incorporate suggestions from Dmitry as follows:
> - Use io_start address instead of compatible string to identify the
> correct instance by comparing with smmu start address and check for
> which smmu the corresponding actlr table is to be picked.
> Link to v6:
> https://lore.kernel.org/all/20231220133808.5654-1-quic_bibekkum@quicinc.com/
>
> Changes in v6 from v5:
> - Remove extra Suggested-by tags.
> - Add return check for arm_mmu500_reset in 1/5 as discussed.
> Link to v5:
> https://lore.kernel.org/all/20231219135947.1623-1-quic_bibekkum@quicinc.com/
>
> Changes in v5 from v4:
> New addition:
> - Modify copyright year in arm-smmu-qcom.h to 2023 from 2022.
> Changes to incorporate suggestions from Dmitry as follows:
> - Modify the defines for prefetch in (foo << bar) format
> as suggested.(FIELD_PREP could not be used in defines
> is not inside any block/function)
> Changes to incorporate suggestions from Konrad as follows:
> - Shift context caching enablement patch as 1/5 instead of 5/5 to
> be picked up as independent patch.
> - Fix the codestyle to orient variables in reverse xmas tree format
> for patch 1/5.
> - Fix variable name in patch 1/5 as suggested.
> Link to v4:
> https://lore.kernel.org/all/20231215101827.30549-1-quic_bibekkum@quicinc.com/
>
> Changes in v4 from v3:
> New addition:
> - Remove actlrcfg_size and use NULL end element instead to traverse
> the actlr table, as this would be a cleaner approach by removing
> redundancy of actlrcfg_size.
> - Renaming of actlr set function to arm_smmu_qcom based proprietary
> convention.
> - break from loop once sid is found and ACTLR value is initialized
> in qcom_smmu_set_actlr.
> - Modify the GFX prefetch value separating into 2 sensible defines.
> - Modify comments for prefetch defines as per SMMU-500 TRM.
> Changes to incorporate suggestions from Konrad as follows:
> - Use Reverse-Christmas-tree sorting wherever applicable.
> - Pass arguments directly to arm_smmu_set_actlr instead of creating
> duplicate variables.
> - Use array indexing instead of direct pointer addressed by new
> addition of eliminating actlrcfg_size.
> - Switch the HEX value's case from upper to lower case in SC7280
> actlrcfg table.
> Changes to incorporate suggestions from Dmitry as follows:
> - Separate changes not related to ACTLR support to different commit
> with patch 5/5.
> - Using pointer to struct for arguments in smr_is_subset().
> Changes to incorporate suggestions from Bjorn as follows:
> - fix the commit message for patch 2/5 to properly document the
> value space to avoid confusion.
> Fixed build issues reported by kernel test robot [1] for
> arm64-allyesconfig [2].
> [1]: https://lore.kernel.org/all/202312011750.Pwca3TWE-lkp@intel.com/
> [2]:
> https://download.01.org/0day-ci/archive/20231201/202312011750.Pwca3TWE-lkp@intel.com/config
> Link to v3:
> https://lore.kernel.org/all/20231127145412.3981-1-quic_bibekkum@quicinc.com/
>
> Changes in v3 from v2:
> New addition:
> - Include patch 3/4 for adding ACTLR support and data for SC7280.
> - Add driver changes for actlr support in gpu smmu.
> - Add target wise actlr data and implementation ops for gpu smmu.
> Changes to incorporate suggestions from Robin as follows:
> - Match the ACTLR values with individual corresponding SID instead
> of assuming that any SMR will be programmed to match a superset of
> the data.
> - Instead of replicating each elements from qcom_smmu_match_data to
> qcom_smmu structre during smmu device creation, replace the
> replicated members with qcom_smmu_match_data structure inside
> qcom_smmu structre and handle the dereference in places that
> requires them.
> Changes to incorporate suggestions from Dmitry and Konrad as follows:
> - Maintain actlr table inside a single structure instead of
> nested structure.
> - Rename prefetch defines to more appropriately describe their
> behavior.
> - Remove SM8550 specific implementation ops and roll back to default
> qcom_smmu_500_impl implementation ops.
> - Add back the removed comments which are NAK.
> - Fix commit description for patch 4/4.
> Link to v2:
> https://lore.kernel.org/all/20231114135654.30475-1-quic_bibekkum@quicinc.com/
>
> Changes in v2 from v1:
> - Incorporated suggestions on v1 from Dmitry,Konrad,Pratyush.
> - Added defines for ACTLR values.
> - Linked sm8550 implementation structure to corresponding
> compatible string.
> - Repackaged actlr value set implementation to separate function.
> - Fixed indentation errors.
> - Link to v1:
> https://lore.kernel.org/all/20231103215124.1095-1-quic_bibekkum@quicinc.com/
>
> Changes in v1 from RFC:
> - Incorporated suggestion form Robin on RFC
> - Moved the actlr data table into driver, instead of maintaining
> it inside soc specific DT and piggybacking on exisiting iommus
> property (iommu = <SID, MASK, ACTLR>) to set this value during
> smmu probe.
> - Link to RFC:
> https://lore.kernel.org/all/a01e7e60-6ead-4a9e-ba90-22a8a6bbd03f@quicinc.com/
>
> Bibek Kumar Patro (5):
> iommu/arm-smmu: re-enable context caching in smmu reset operation
> iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
> iommu/arm-smmu: add support for PRR bit setup
> iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
> iommu/arm-smmu: add ACTLR data and support for qcom_smmu_500
>
> .../iommu/arm/arm-smmu/arm-smmu-qcom-debug.c | 2 +-
> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 134 +++++++++++++++++-
> drivers/iommu/arm/arm-smmu/arm-smmu-qcom.h | 3 +-
> drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 +
> include/linux/adreno-smmu-priv.h | 10 +-
> 5 files changed, 144 insertions(+), 7 deletions(-)
>
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list