[PATCH 3/3] ARM: dts: vf610-bk4: Use the more specific "lwn,bk4-spi"

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Currently, the compatible string used for the spidev device is "lwn,bk4",
which is the same as the board compatible string documented at fsl.yaml.

This causes several dt-schema warnings:

make dtbs_check DT_SCHEMA_FILES=fsl.yaml
...

['lwn,bk4'] is too short
'lwn,bk4' is not one of ['tq,imx8dxp-tqma8xdp-mba8xx']
'lwn,bk4' is not one of ['tq,imx8qxp-tqma8xqp-mba8xx']
'lwn,bk4' is not one of ['armadeus,imx1-apf9328', 'fsl,imx1ads']
...

Use a more specific "lwn,bk4-spi" compatible string to fix the problem.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/boot/dts/nxp/vf/vf610-bk4.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
index 722182f5fd17..2492fb99956c 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts
@@ -119,7 +119,7 @@ &dspi0 {
 	status = "okay";
 
 	spidev0 at 0 {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 		fsl,spi-cs-sck-delay = <200>;
@@ -136,7 +136,7 @@ &dspi3 {
 	#address-cells = <0>;
 
 	slave {
-		compatible = "lwn,bk4";
+		compatible = "lwn,bk4-spi";
 		spi-max-frequency = <30000000>;
 	};
 };
-- 
2.34.1