[PATCH net-next 14/15] net: sparx5: add compatible strings for lan969x and verify the target

[Daniel Machon]

Hi Simon,

> > Add compatible strings for the twelve lan969x SKU's (Stock Keeping Unit)
> > that we support, and verify that the devicetree target is supported by
> > the chip target.
> >
> > Each SKU supports different bandwidths and features (see [1] for
> > details). We want to be able to run a SKU with a lower bandwidth and/or
> > feature set, than what is supported by the actual chip. In order to
> > accomplish this we:
> >
> >     - add new field sparx5->target_dt that reflects the target from the
> >       devicetree (compatible string).
> >
> >     - compare the devicetree target with the actual chip target. If the
> >       bandwidth and features provided by the devicetree target is
> >       supported by the chip, we approve - otherwise reject.
> >
> >     - set the core clock and features based on the devicetree target
> >
> > [1] https://www.microchip.com/en-us/product/lan9698
> >
> > Reviewed-by: Steen Hegelund <Steen.Hegelund at microchip.com>
> > Signed-off-by: Daniel Machon <daniel.machon at microchip.com>
> > ---
> >  drivers/net/ethernet/microchip/sparx5/Makefile     |   1 +
> >  .../net/ethernet/microchip/sparx5/sparx5_main.c    | 194 ++++++++++++++++++++-
> >  .../net/ethernet/microchip/sparx5/sparx5_main.h    |   1 +
> >  3 files changed, 193 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/microchip/sparx5/Makefile b/drivers/net/ethernet/microchip/sparx5/Makefile
> > index 3435ca86dd70..8fe302415563 100644
> > --- a/drivers/net/ethernet/microchip/sparx5/Makefile
> > +++ b/drivers/net/ethernet/microchip/sparx5/Makefile
> > @@ -19,3 +19,4 @@ sparx5-switch-$(CONFIG_DEBUG_FS) += sparx5_vcap_debugfs.o
> >  # Provide include files
> >  ccflags-y += -I$(srctree)/drivers/net/ethernet/microchip/vcap
> >  ccflags-y += -I$(srctree)/drivers/net/ethernet/microchip/fdma
> > +ccflags-y += -I$(srctree)/drivers/net/ethernet/microchip/lan969x
> > diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
> > index 5c986c373b3e..edbe639d98c5 100644
> > --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
> > +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
> > @@ -24,6 +24,8 @@
> >  #include <linux/types.h>
> >  #include <linux/reset.h>
> >
> > +#include "lan969x.h" /* lan969x_desc */
> > +
> 
> Hi Daniel,
> 
> Perhaps this will change when Krzysztof's comment elsewhere in this thread
> is addressed. But as it stands the construction in the above two hunks
> appears to cause a build failure.
> 
>   CC      drivers/net/ethernet/microchip/sparx5/sparx5_main.o
> In file included from drivers/net/ethernet/microchip/sparx5/sparx5_main.c:27:
> ./drivers/net/ethernet/microchip/lan969x/lan969x.h:10:10: fatal error: sparx5_main.h: No such file or directory
>    10 | #include "sparx5_main.h"
>       |          ^~~~~~~~~~~~~~~
> 
> My preference would be to move away from adding -I directives and, rather,
> use relative includes as is common practice in Networking drivers (at least).
> 
> ...
> 
> --
> pw-bot: changes-requested

I didn't see this build failure when I ran my tests, nor did the NIPA
tests reveal it. I can only reproduce it if I point to the microchip
subdir when building - but maybe that's what you did too?

Anyway, I will skip the -I includes and resort to relative includes, as
per your request. Thanks.

/Daniel