[PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit

[CK Hu (胡俊光)]

Hi, Shu-hsiang:

On Wed, 2024-10-09 at 19:15 +0800, Shu-hsiang Yang wrote:
> Introduces the ISP pipeline driver for the MediaTek ISP raw and yuv
> modules. Key functionalities include data processing, V4L2 integration,
> resource management, debug support, and various control operations.
> Additionally, IRQ handling, platform device management, and MediaTek
> ISP DMA format support are also included.
> 
> Signed-off-by: Shu-hsiang Yang <Shu-hsiang.Yang at mediatek.com>
> ---

[snip]

> +static bool mtk_cam_raw_resource_calc(struct mtk_cam_device *cam,
> +				      struct mtk_cam_resource_config *res,
> +				      s64 pixel_rate, int res_plan,
> +				      int in_w, int in_h, int *out_w, int *out_h)
> +{
> +	int res_step_type = 0;
> +	int tgo_pxl_mode = 1;
> +	int pixel_mode[MTK_CAMSYS_RES_STEP_NUM] = {0};
> +	int bin_temp = 0, frz_temp = 0, hwn_temp = 0;
> +	int bin_en = 0, frz_en = 0, twin_en = 0, clk_cur = 0;
> +	int idx = 0, clk_res = 0, idx_res = 0;
> +	bool res_found = false;
> +	int lb_chk_res = -1;
> +	int frz_ratio = 100;
> +	int p;
> +
> +	res->res_plan = res_plan;
> +	res->pixel_rate = pixel_rate;
> +	/* test pattern */
> +	if (res->pixel_rate == 0)
> +		res->pixel_rate = 450 * MHz;
> +	dev_dbg(cam->dev,
> +		"[Res] PR = %lld, w/h=%d/%d HWN(%d)/BIN(%d)/FRZ(%d),Plan:%d\n",
> +		res->pixel_rate, in_w, in_h,
> +		res->hwn_limit_max, res->bin_limit, res->frz_limit, res->res_plan);
> +
> +	memcpy(res->res_strategy, raw_resource_strategy_plan + res->res_plan,
> +	       MTK_CAMSYS_RES_STEP_NUM * sizeof(int));
> +	res->bin_enable = 0;
> +	res->raw_num_used = 1;
> +	res->frz_enable = 0;
> +	res->frz_ratio = frz_ratio;
> +	for (idx = 0; idx < MTK_CAMSYS_RES_STEP_NUM ; idx++) {
> +		res_step_type = res->res_strategy[idx] & MTK_CAMSYS_RES_IDXMASK;
> +		switch (res_step_type) {
> +		case MTK_CAMSYS_RES_BIN_TAG:
> +			bin_temp = res->res_strategy[idx] - E_RES_BIN_S;
> +			if (bin_temp <= res->bin_limit)
> +				bin_en = bin_temp;
> +			if (bin_en && frz_en)
> +				frz_en = 0;
> +			break;
> +		case MTK_CAMSYS_RES_FRZ_TAG:
> +			frz_temp = res->res_strategy[idx] - E_RES_FRZ_S;
> +			if (res->frz_limit < 100)
> +				frz_en = frz_temp;
> +			break;
> +		case MTK_CAMSYS_RES_HWN_TAG:
> +			hwn_temp = res->res_strategy[idx] - E_RES_HWN_S;
> +			if (hwn_temp + 1 <= res->hwn_limit_max)
> +				twin_en = hwn_temp;
> +			break;
> +		case MTK_CAMSYS_RES_CLK_TAG:
> +			clk_cur = res->res_strategy[idx] - E_RES_CLK_S;
> +			break;
> +		default:
> +			break;
> +		}
> +
> +		/* 1 for force bin on */
> +		if (res->bin_limit >= 1)
> +			bin_en = 1;
> +
> +		if (res->hwn_limit_min > 1)
> +			twin_en = 1;
> +
> +		/* max line buffer check*/
> +		lb_chk_res = mtk_raw_linebuf_chk(twin_en, res->bin_limit & BIN_ON,
> +						 frz_en, res->bin_limit & QBND_ON,
> +						 is_cbn_en(res->bin_limit),
> +						 in_w, &frz_ratio);
> +		/* frz ratio*/
> +		if (res_step_type == MTK_CAMSYS_RES_FRZ_TAG) {
> +			res->frz_ratio = res->frz_limit < FRZ_PXLMODE_THRES ?
> +				res->frz_limit : FRZ_PXLMODE_THRES;
> +		}
> +		/*try 1-pixel mode first*/
> +		for (p = 1; p <= MTK_CAMSYS_PROC_DEFAULT_PIXELMODE; p++) {

MTK_CAMSYS_PROC_DEFAULT_PIXELMODE is 1, so this for-loop could be dropped.

> +			tgo_pxl_mode = mtk_raw_pixelmode_calc(p, twin_en,
> +							      bin_en, frz_en,
> +							      res->frz_ratio);

mtk_raw_pixelmode_calc() would always return 1, so mtk_raw_pixelmode_calc() could be dropped.

Regards,
CK

> +			/**
> +			 * isp throughput along resource strategy
> +			 * (compared with pixel rate)
> +			 */
> +			pixel_mode[idx] = tgo_pxl_mode;
> +
> +			/* only support 1-pixel mode */
> +			if (p == 1 && lb_chk_res == LB_CHECK_OK) {
> +				if (!res_found) {
> +					res->bin_enable = bin_en;
> +					res->frz_enable = frz_en;
> +					res->raw_num_used = twin_en + 1;
> +					clk_res = clk_cur;
> +					idx_res = idx;
> +					res_found = true;
> +					break;
> +				}
> +			}
> +		}
> +		dev_dbg(cam->dev,
> +			"Res-%d B/F/H/C=%d/%d/%d/%d -> %d/%d/%d/%d (%d)(%d)\n",
> +			idx, bin_temp, frz_temp, hwn_temp, clk_cur, bin_en,
> +			frz_en, twin_en, clk_cur, lb_chk_res, pixel_mode[idx]);
> +	}
> +
> +	tgo_pxl_mode = pixel_mode[idx_res];
> +	switch (tgo_pxl_mode) {
> +	case 1:
> +		res->tgo_pxl_mode = 0;
> +		break;
> +	case 2:
> +		res->tgo_pxl_mode = 1;
> +		break;
> +	case 4:
> +		res->tgo_pxl_mode = 2;
> +		break;
> +	case 8:
> +		res->tgo_pxl_mode = 3;
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	mtk_raw_update_debug_param(cam, res, &clk_res);
> +
> +	if (res_found) {
> +		dev_info(cam->dev,
> +			 "Res-end:%d BIN/FRZ/HWN/CLK/pxl=%d/%d(%d)/%d/%d/%d, clk:%d\n",
> +			 idx_res, res->bin_enable, res->frz_enable, res->frz_ratio,
> +			 res->raw_num_used, clk_res, res->tgo_pxl_mode,
> +			 res->clk_target);
> +	} else {
> +		dev_dbg(cam->dev, "[%s] Error resource result\n", __func__);
> +	}
> +	if (res->bin_enable) {
> +		*out_w = in_w >> 1;
> +		*out_h = in_h >> 1;
> +	} else if (res->frz_enable) {
> +		*out_w = in_w * res->frz_ratio / 100;
> +		*out_h = in_h * res->frz_ratio / 100;
> +	} else {
> +		*out_w = in_w;
> +		*out_h = in_h;
> +	}
> +
> +	return res_found;
> +}
> +