[PATCH] ARM: dts: imx6sll: fix anatop thermal dtbs_check warnings

[Andreas Kemnade]

Fix anatop thermal related dtbs_check warnings about node name
and missing thermal-cells property.

Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
---
 arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index ddeb5b37fb78b..85fe2a4ab97a0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -525,7 +525,7 @@ reg_3p0: regulator-3p0 at 20c8120 {
 					anatop-enable-bit = <0>;
 				};
 
-				tempmon: temperature-sensor {
+				tempmon: tempmon {
 					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
 					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-parent = <&gpc>;
@@ -533,6 +533,7 @@ tempmon: temperature-sensor {
 					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
 					nvmem-cell-names = "calib", "temp_grade";
 					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
 				};
 			};
 
-- 
2.39.5