[PATCH] arm64: dts: mediatek: mt8188: Fix USB3 PHY port default status

[Fei Shao]

The T-PHY controller at 0x11e40000 controls two underlying USB2 and USB3
PHY ports. The USB3 port works normally just like the others, so there's
no point in disabling it separately. Otherwise, board DTs would have to
enable both the T-PHY controller and one of its sub-nodes in particular,
which is slightly redundant and confusing.

Remove the status line in the u3port1 node, so it's ready to be used
once the T-PHY controller is enabled.

Fixes: 9461e0caac9e ("arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile")
Signed-off-by: Fei Shao <fshao at chromium.org>
---

 arch/arm64/boot/dts/mediatek/mt8188.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 2710e18ce696..3d11a989f39f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1961,7 +1961,6 @@ u3port1: usb-phy at 700 {
 					 <&clk26m>;
 				clock-names = "ref", "da_ref";
 				#phy-cells = <1>;
-				status = "disabled";
 			};
 		};
 
-- 
2.47.0.rc1.288.g06298d1525-goog