[PATCH v3 0/6] Add minimal Exynos990 SoC and SM-N981B support

[Igor Belwon]

Hi folks,

This series adds initial support for the Exynos 990 SoC and also
initial board support for the Samsung Galaxy Note20 5G (SM-N981B)
codenamed c1s.

The Exynos 990 SoC is also used in the S20 series, as well as in the
Note 20 Ultra phones. Currently the device trees added are for the
Exynos 990 SoC and c1s. The device tree has been tested with 
dtbs_check W=1 and results in no warnings.

This initial bringup consists of:
 * cpus
 * pinctrl
 * gpio-keys
 * simple-framebuffer
 
This is enough to reach a shell in an initramfs. More platform support
will be added in the future.

The preferred way to boot the upstream kernel is by using a shim
bootloader, called uniLoader [1], which works around some issues with
the stock, non-replacable Samsung S-LK bootloader. For example, the
stock bootloader leaves the decon trigger control unset, which causes
the framebuffer not to refresh.

Device functionality depends on the 2nd patch series:
"Add Exynos990 pinctrl and chipid drivers"

[1] https://github.com/ivoszbg/uniLoader

Changes in v3:
 - Move pinctrl DT nodes from the 2nd patch series
 - Resend patches to the correct lists.

Changes in v2:
 - Added acked-by tag by Rob Herring
 - Fixed two stray newlines in SoC and device DTs
 - Fixed commit message for the c1s device tree
 - Changed osc-clock to clock-osc and ordered nodes in SoC DT
 - Fixed ordering in the gic node in SoC DT
 - Fixed memory node unit address
 - Fixed memory node reg properties, to map all available RAM
 - Moved pinctrl binding commits to the 2nd patch series.

Kind regards,
Igor

Igor Belwon (6):
  dt-bindings: arm: cpus: Add Samsung Mongoose M5
  dt-bindings: hwinfo: exynos-chipid: Add compatible for Exynos 990
    chipid
  dt-bindings: arm: samsung: samsung-boards: Add bindings for Exynos 990
    boards
  soc: samsung: exynos-chipid: Add support for Exynos 990 chipid
  arm64: dts: exynos: Add initial support for the Exynos 990 SoC
  arm64: dts: exynos: Add initial support for Samsung Galaxy Note20 5G
    (c1s)

 .../devicetree/bindings/arm/cpus.yaml         |    1 +
 .../bindings/arm/samsung/samsung-boards.yaml  |    6 +
 .../hwinfo/samsung,exynos-chipid.yaml         |    1 +
 arch/arm64/boot/dts/exynos/Makefile           |    1 +
 arch/arm64/boot/dts/exynos/exynos990-c1s.dts  |  115 +
 .../boot/dts/exynos/exynos990-pinctrl.dtsi    | 2195 +++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos990.dtsi     |  251 ++
 drivers/soc/samsung/exynos-chipid.c           |    1 +
 8 files changed, 2571 insertions(+)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-c1s.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos990.dtsi

-- 
2.45.2