[PATCH v6 2/2] arm64: dts: rockchip: Add rk3588-orangepi-5b device tree and refactor
Dragan Simic
dsimic at manjaro.org
Tue Oct 15 18:09:20 PDT 2024
Hello Cenk,
On 2024-10-15 21:33, Cenk Uluisik wrote:
> I accidently didnt save the Patch Version on the first email, it's the
> same patch but with fixed versioning. It was an accident, sorry.
As I suggested already, it's always a good idea to send patches
to your own email address first, before sending them to the ML(s),
to check the patches one last time and make sure everything looks
good. That's the way I do it, FWIW.
> Am Di., 15. Okt. 2024 um 21:29 Uhr schrieb Cenk Uluisik
> <cenk.uluisik at googlemail.com>:
>
>> Implements a slightly modified rk3588s-orangepi-5b.dts from the
>> vendor.
>> Unfortunately the &wireless_bluetooth and &wireless_wlan are not
>> implemented yet.
>>
>> Bigger parts of the rk3588s-orangepi-5.dts file were moved into a
>> new
>> rk3588s-orangepi-5.dtsi file, so that both device trees from the
>> orangepi-5 and 5b include from it and avoid including from the .dts.
>>
>> This changes the Orange Pi 5's sdmmc alias to be mmc1, breaking
>> existing
>> users if they used the /dev/mmc0 device file, so it's consistent
>> with all
>> the other rk3588 DTS, which, is also the new default that rockchip
>> wants
>> to use.
>> https://github.com/orangepi-xunlong/linux-orangepi/commit/
>> bce92d16b230b8e93c2831fb7768839fd7bbab04
>> Therefore add the sdhc alias to be mmc0 on the
>> rk3588s-orangepi-5b.dts.
>>
>> The "enable-active-low" warning is addressed here:
>>
> https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/
>>
> commit/?h=v6.12-armsoc/dtsfixes&id=f4d29bebaa6118c1e51e8f1c21ce2b34f43e1479
>> The "leds-gpio" warning was already there because the DTS checking
>> script
>> might not like the ID, which is probably avoidable by renaming it,
>> but this
>> will be addressed in a seperate issue.
>>
>> How does this board differ from the original Orange Pi 5?
>> - the Orange Pi 5 has a M.2 NVMe M-key PCI 2.0x1
>> slot (hooked to combphy0_ps) whereas the Orange Pi 5b uses
>> combphy0_ps
>> for the WiFi.
>> - The Orange Pi 5 with the M.2 socket has a regulator defined
>> hooked to
>> "GPIO0_C5" (i.e. PCIE_PWREN_H) whereas the Orange Pi 5B has
>> GPIO0_C5
>> hooked to BT_WAKE_HOST.
>> - builtin eMMC storage
>> - no SPI NOR flash (u-boot, preboot etc. initiates
>> from within the eMMC
>> storage)
>> - ap6275p Wifi module (like the Orange Pi 5 Plus)
>> - builtin BlueTooth module
>>
>> Signed-off-by: Cenk Uluisik <cenk.uluisik at googlemail.com>
More information about the linux-arm-kernel
mailing list