[PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober

[Chen-Yu Tsai]

On Tue, Oct 15, 2024 at 7:24 PM Andy Shevchenko
<andriy.shevchenko at linux.intel.com> wrote:
>
> On Tue, Oct 15, 2024 at 02:32:54PM +0800, Chen-Yu Tsai wrote:
> > On Mon, Oct 14, 2024 at 7:23 PM Andy Shevchenko
> > <andriy.shevchenko at linux.intel.com> wrote:
> > > On Mon, Oct 14, 2024 at 12:56:20PM +0800, Chen-Yu Tsai wrote:
> > > > On Thu, Oct 10, 2024 at 11:32 PM Andy Shevchenko
> > > > <andriy.shevchenko at linux.intel.com> wrote:
> > > > > On Thu, Oct 10, 2024 at 06:29:44PM +0300, Andy Shevchenko wrote:
> > > > > > On Tue, Oct 08, 2024 at 03:34:26PM +0800, Chen-Yu Tsai wrote:
>
> ...
>
> > > > > > > +   .cfg = &chromeos_i2c_probe_simple_trackpad_cfg,
> > > > > >
> > > > > >       .cfg = DEFINE_I2C_OF_PROBE_CFG(trackpad, i2c_of_probe_simple_ops),
> > > > > >
> > > > > > Or even
> > > > > >
> > > > > > #define DEFINE_I2C_OF_PROBE_CFG_SIMPLE(_type_)                        \
> > > > > >       DEFINE_I2C_OF_PROBE_CFG(type, &i2c_of_probe_simple_ops)
> > > >
> > > > I'm not inclined on using compound literals here. "simple X cfg" will
> > > > likely get shared between multiple |chromeos_i2c_probe_data| entries,
> > > > and AFAIK the toolchain can't merge them. So we would end up with one
> > > > compound literal per entry, even if their contents are the same.
> > >
> > > I'm not sure I follow, you are using compound literal _already_.
> > > How does my proposal change that?
> >
> > I'm using it where it makes sense, i.e. where the embedded variable
> > is not going to be shared with other instances.
> >
> > For the dumb probers, there's only going to be one instance per "type".
> >
> > For the simple probers, the config part is still one instance per "type",
> > but the parameters are board and component specific. There will be
> > multiple instances. Hence the config part can be shared, while the
> > parameters likely won't be.
> >
> > > > > With that also looking at the above
> > > > >
> > > > > #define DEFINE_I2C_OF_PROBE_CFG_NONE(_type_)                            \
> > > > >         DEFINE_I2C_OF_PROBE_CFG(type, NULL)
> > > >
> > > > For the "dumb" case it makes sense though, since it would be one instance
> > > > per type. But we could go further and just wrap the whole
> > > > |chromeos_i2c_probe_data| declaration.
> > >
> > > Maybe it's too far from now...
> >
> > This is what I have:
> >
> > #define DEFINE_CHROMEOS_I2C_PROBE_DATA_DUMB(_type)
> >                         \
> >        static const struct chromeos_i2c_probe_data
> > chromeos_i2c_probe_dumb_ ## _type = {       \
>
> >                .cfg = &(const struct i2c_of_probe_cfg) {
>
> But the below is static initializer, why do you need a compound literal here?

Because .cfg takes a pointer to a struct. It's not an embedded struct.
The compound literal creates the internal struct, and then its address
is taken and assigned to the .cfg field.

Does that make sense?

> >                         \
> >                        .type = #_type,
> >                         \
> >                },
> >                         \
> > };
> >
> > DEFINE_CHROMEOS_I2C_PROBE_DATA_DUMB(touchscreen);
>
> s/dumb/simple/g

"simple" is taken. This is "dumb" as in it does not need any helpers.
Maybe "no-op" if you don't like the negative connotation?


ChenYu