[PATCH v3 6/7] arm64: dts: imx95-19x19-evk: add nxp,ctrl-ids property

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Add 'nxp,ctrl-ids' for SCMI firmware to configure the board ctrls as
wakeup sources.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 37a1d4ca1b2079880f6a0397027c22c5e471bd40..5101cd171e095fb5209464055a52ebdfa7dc5a61 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -8,6 +8,15 @@
 #include <dt-bindings/pwm/pwm.h>
 #include "imx95.dtsi"
 
+#define FALLING_EDGE			1
+#define RISING_EDGE			2
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000	/* PCAL6408A-0 */
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001	/* PCAL6408A-4 */
+#define BRD_SM_CTRL_BT_WAKE		0x8002	/* PCAL6408A-5 */
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003	/* PCAL6408A-6 */
+#define BRD_SM_CTRL_BUTTON		0x8004	/* PCAL6408A-7 */
+
 / {
 	model = "NXP i.MX95 19X19 board";
 	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
@@ -357,6 +366,14 @@ &usdhc2 {
 	status = "okay";
 };
 
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE1_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BT_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_PCIE2_WAKE	FALLING_EDGE
+			BRD_SM_CTRL_BUTTON	FALLING_EDGE>;
+};
+
 &wdog3 {
 	fsl,ext-reset-output;
 	status = "okay";

-- 
2.37.1