[PATCH v3 1/8] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
Krzysztof Kozlowski
krzk at kernel.org
Fri Oct 11 07:49:15 PDT 2024
On Fri, Oct 11, 2024 at 07:39:25PM +0530, Vikram Sharma wrote:
> @@ -0,0 +1,440 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +
Drop blank line (that's a new finding, I would not complain except that
I expect new version, see further).
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + camss: camss at acaf000 {
> + compatible = "qcom,sc7280-camss";
> +
> + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
Alignment did not improve. Please carefully read DTS coding style.
> + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
> + <&clock_camcc CAM_CC_IFE_2_CSID_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_1_CSID_CLK>,
> + <&clock_camcc CAM_CC_CSIPHY0_CLK>,
> + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSIPHY1_CLK>,
> + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSIPHY2_CLK>,
> + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSIPHY3_CLK>,
> + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
> + <&clock_camcc CAM_CC_CSIPHY4_CLK>,
> + <&clock_camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&gcc GCC_CAMERA_AHB_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CLK>,
> + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_CLK>,
> + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_2_AXI_CLK>,
> + <&clock_camcc CAM_CC_IFE_2_CLK>,
> + <&clock_camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_0_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_1_CLK>,
> + <&clock_camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>;
> +
> + clock-names = "camnoc_axi",
> + "csi0",
Alignment did not improve. Please carefully read DTS coding style.
> + "csi1",
> + "csi2",
> + "csi3",
> + "csi4",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "gcc_camera_ahb",
> + "gcc_camera_axi",
> + "soc_ahb",
> + "vfe0_axi",
> + "vfe0",
> + "vfe0_cphy_rx",
> + "vfe1_axi",
> + "vfe1",
> + "vfe1_cphy_rx",
> + "vfe2_axi",
> + "vfe2",
> + "vfe2_cphy_rx",
> + "vfe0_lite",
> + "vfe0_lite_cphy_rx",
> + "vfe1_lite",
> + "vfe1_lite_cphy_rx";
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
> + <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>;
Alignment did not improve. Please carefully read DTS coding style.
> +
> + interconnect-names = "ahb", "hf_0";
> +
> + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
Alignment did not improve. Please carefully read DTS coding style.
> + <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
Alignment did not improve. Please carefully read DTS coding style.
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + iommus = <&apps_smmu 0x800 0x4e0>;
> +
> + power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
> + <&camcc CAM_CC_IFE_1_GDSC>,
Alignment did not improve. Please carefully read DTS coding style.
> + <&camcc CAM_CC_IFE_2_GDSC>,
> + <&camcc CAM_CC_TITAN_TOP_GDSC>;
> +
> + power-domains-names = "ife0", "ife1", "ife2", "top";
> +
> + reg = <0x0 0x0acb3000 0x0 0x1000>,
> + <0x0 0x0acba000 0x0 0x1000>,
> + <0x0 0x0acc1000 0x0 0x1000>,
Alignment did not improve. Please carefully read DTS coding style.
> + <0x0 0x0acc8000 0x0 0x1000>,
> + <0x0 0x0accf000 0x0 0x1000>,
> + <0x0 0x0ace0000 0x0 0x2000>,
> + <0x0 0x0ace2000 0x0 0x2000>,
> + <0x0 0x0ace4000 0x0 0x2000>,
> + <0x0 0x0ace6000 0x0 0x2000>,
> + <0x0 0x0ace8000 0x0 0x2000>,
> + <0x0 0x0acaf000 0x0 0x4000>,
> + <0x0 0x0acb6000 0x0 0x4000>,
> + <0x0 0x0acbd000 0x0 0x4000>,
> + <0x0 0x0acc4000 0x0 0x4000>,
> + <0x0 0x0accb000 0x0 0x4000>;
> +
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
Alignment did not improve. Please carefully read DTS coding style.
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list