[PATCH v2 1/7] arm64: dts: freescale: imx95: set max-rx-timeout-ms

[Peng Fan]

> Subject: Re: [PATCH v2 1/7] arm64: dts: freescale: imx95: set max-rx-
> timeout-ms
> 
> On Tue, Sep 03, 2024 at 03:17:46PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > With 'max-rx-timeout-ms' property added in
> 'Documentation/devicetree/
> > indings/firmware/arm,scmi.yaml', set the value for i.MX95.
> >
> > NXP i.MX95 SCMI Firmware designation does not allow timeout, it
> will
> > not recover if the Agents use timeout design. So set a large value
> > (5000ms) here.
> >
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx95.dtsi | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi
> > b/arch/arm64/boot/dts/freescale/imx95.dtsi
> > index ecdc6b7b5129..7880d3efbd7e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> > @@ -294,6 +294,8 @@ scmi {
> >  			#address-cells = <1>;
> >  			#size-cells = <0>;
> >
> 
> Can we drop this newline?
> 
> > +			max-rx-timeout-ms = <5000>;
> 
> max-rx-timeout-ms is an optional property.  As i.MX95 SCMI firmware
> does not allow timeout, I wonder if absence of the property will just do
> the right thing?

The default value in driver is 30ms, this is not enough in some cases.

Thanks,
Peng.

> 
> Shawn
> 
> > +
> >  			scmi_devpd: protocol at 11 {
> >  				reg = <0x11>;
> >  				#power-domain-cells = <1>;
> >
> > --
> > 2.37.1
> >