[PATCH 5/7] scsi: ufs: exynos: gs101: remove unused phy attribute fields

[Peter Griffin]

Now that exynos_ufs_specify_phy_time_attr() checks the appropriate
EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR flag. Remove the unused fields
in gs101_uic_attr.

Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
---
 drivers/ufs/host/ufs-exynos.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c
index a1a2fdcb8a40..9d668d13fe94 100644
--- a/drivers/ufs/host/ufs-exynos.c
+++ b/drivers/ufs/host/ufs-exynos.c
@@ -2068,26 +2068,6 @@ static const struct exynos_ufs_drv_data exynos_ufs_drvs = {
 
 static struct exynos_ufs_uic_attr gs101_uic_attr = {
 	.tx_trailingclks		= 0xff,
-	.tx_dif_p_nsec			= 3000000,	/* unit: ns */
-	.tx_dif_n_nsec			= 1000000,	/* unit: ns */
-	.tx_high_z_cnt_nsec		= 20000,	/* unit: ns */
-	.tx_base_unit_nsec		= 100000,	/* unit: ns */
-	.tx_gran_unit_nsec		= 4000,		/* unit: ns */
-	.tx_sleep_cnt			= 1000,		/* unit: ns */
-	.tx_min_activatetime		= 0xa,
-	.rx_filler_enable		= 0x2,
-	.rx_dif_p_nsec			= 1000000,	/* unit: ns */
-	.rx_hibern8_wait_nsec		= 4000000,	/* unit: ns */
-	.rx_base_unit_nsec		= 100000,	/* unit: ns */
-	.rx_gran_unit_nsec		= 4000,		/* unit: ns */
-	.rx_sleep_cnt			= 1280,		/* unit: ns */
-	.rx_stall_cnt			= 320,		/* unit: ns */
-	.rx_hs_g1_sync_len_cap		= SYNC_LEN_COARSE(0xf),
-	.rx_hs_g2_sync_len_cap		= SYNC_LEN_COARSE(0xf),
-	.rx_hs_g3_sync_len_cap		= SYNC_LEN_COARSE(0xf),
-	.rx_hs_g1_prep_sync_len_cap	= PREP_LEN(0xf),
-	.rx_hs_g2_prep_sync_len_cap	= PREP_LEN(0xf),
-	.rx_hs_g3_prep_sync_len_cap	= PREP_LEN(0xf),
 	.pa_dbg_opt_suite1_val		= 0x90913C1C,
 	.pa_dbg_opt_suite1_off		= PA_GS101_DBG_OPTION_SUITE1,
 	.pa_dbg_opt_suite2_val		= 0xE01C115F,
-- 
2.47.0.rc0.187.ge670bccf7e-goog