[PATCH V8 3/4] arm64: dts: ti: k3-am62p: add opp frequencies
Dhruva Gole
d-gole at ti.com
Tue Oct 8 06:20:52 PDT 2024
From: Bryan Brattlof <bb at ti.com>
One power management technique available to the Cortex-A53s is their
ability to dynamically scale their frequency across the device's
Operating Performance Points (OPP)
The OPPs available for the Cortex-A53s on the AM62Px can vary based on
the silicon variant used. The SoC variant is encoded into the
WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register which is used to limit
the OPP entries the SoC supports. A table of all these variants can be
found in its data sheet[0] for the AM62Px processor family.
Add the OPP table into the SoC's fdti file along with the syscon node to
describe the WKUP_MMR0_WKUP0_CTRL_MMR0_JTAG_USER_ID register to detect
the SoC variant.
[0] https://www.ti.com/lit/ds/symlink/am62p-q1.pdf
Signed-off-by: Bryan Brattlof <bb at ti.com>
Signed-off-by: Dhruva Gole <d-gole at ti.com>
---
.../dts/ti/k3-am62p-j722s-common-wakeup.dtsi | 5 ++
arch/arm64/boot/dts/ti/k3-am62p5.dtsi | 47 +++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 315d0092e736..6f32135f00a5 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -20,6 +20,11 @@ chipid: chipid at 14 {
bootph-all;
};
+ opp_efuse_table: syscon at 18 {
+ compatible = "ti,am62-opp-efuse-table", "syscon";
+ reg = <0x18 0x4>;
+ };
+
cpsw_mac_syscon: ethernet-mac-syscon at 200 {
compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
reg = <0x200 0x8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
index 41f479dca455..140587d02e88 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -47,6 +47,7 @@ cpu0: cpu at 0 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
+ operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 135 0>;
};
@@ -62,6 +63,7 @@ cpu1: cpu at 1 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
+ operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 136 0>;
};
@@ -77,6 +79,7 @@ cpu2: cpu at 2 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
+ operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 137 0>;
};
@@ -92,10 +95,54 @@ cpu3: cpu at 3 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&l2_0>;
+ operating-points-v2 = <&a53_opp_table>;
clocks = <&k3_clks 138 0>;
};
};
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ opp-shared;
+ syscon = <&opp_efuse_table>;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-supported-hw = <0x01 0x0007>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-supported-hw = <0x01 0x0006>;
+ clock-latency-ns = <6000000>;
+ };
+
+ opp-1250000000 {
+ opp-hz = /bits/ 64 <1250000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ clock-latency-ns = <6000000>;
+ opp-suspend;
+ };
+ };
+
l2_0: l2-cache0 {
compatible = "cache";
cache-unified;
--
2.34.1
More information about the linux-arm-kernel
mailing list