[PATCH net-next v2 1/3] dt-bindings: net: emaclite: Add clock support

[Radhey Shyam Pandey]

From: Abin Joseph <abin.joseph at amd.com>

Add s_axi_aclk AXI4 clock support. Traditionally this IP was used on
microblaze platforms which had fixed clocks enabled all the time. But
since its a PL IP, it can also be used on SoC platforms like Zynq
UltraScale+ MPSoC which combines processing system (PS) and user
programmable logic (PL) into the same device. On these platforms instead
of fixed enabled clocks it is mandatory to explicitly enable IP clocks
for proper functionality.

So make clock a required property and also define max supported clock
constraints.

Signed-off-by: Abin Joseph <abin.joseph at amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey at amd.com>
---
Changes for v2:
- Describe clocks as required property.
---
 Documentation/devicetree/bindings/net/xlnx,emaclite.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
index 92d8ade988f6..e16384aff557 100644
--- a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -29,6 +29,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   phy-handle: true
 
   local-mac-address: true
@@ -45,6 +48,7 @@ required:
   - compatible
   - reg
   - interrupts
+  - clocks
   - phy-handle
 
 additionalProperties: false
@@ -56,6 +60,7 @@ examples:
         reg = <0x40e00000 0x10000>;
         interrupt-parent = <&axi_intc_1>;
         interrupts = <1>;
+        clocks = <&dummy>;
         local-mac-address = [00 00 00 00 00 00];
         phy-handle = <&phy0>;
         xlnx,rx-ping-pong;
-- 
2.34.1