[PATCH 17/20] arm64: dts: renesas: Use interrupts-extended for video decoders

Niklas Söderlund niklas.soderlund at ragnatech.se
Fri Oct 4 10:41:08 PDT 2024


On 2024-10-04 14:52:59 +0200, Geert Uytterhoeven wrote:
> Use the more concise interrupts-extended property to fully describe the
> interrupts.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>

> ---
>  arch/arm64/boot/dts/renesas/ebisu.dtsi                     | 5 ++---
>  .../dts/renesas/r8a77970-eagle-function-expansion.dtso     | 7 +++----
>  arch/arm64/boot/dts/renesas/salvator-common.dtsi           | 5 ++---
>  3 files changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
> index b4e0347d3617a83e..ab8283656660059a 100644
> --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
> @@ -434,10 +434,9 @@ video-receiver at 70 {
>  		compatible = "adi,adv7482";
>  		reg = <0x70>;
>  
> -		interrupt-parent = <&gpio0>;
> +		interrupts-extended = <&gpio0 7 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gpio0 17 IRQ_TYPE_LEVEL_LOW>;
>  		interrupt-names = "intrq1", "intrq2";
> -		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
> -			     <17 IRQ_TYPE_LEVEL_LOW>;
>  
>  		ports {
>  			#address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso b/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso
> index 3aa243c5f04c8022..9450d8ac94cbe977 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle-function-expansion.dtso
> @@ -82,8 +82,7 @@ hdmi-decoder at 4c {
>  		compatible = "adi,adv7612";
>  		reg = <0x4c>, <0x50>, <0x52>, <0x54>, <0x56>, <0x58>;
>  		reg-names = "main", "afe", "rep", "edid", "hdmi", "cp";
> -		interrupt-parent = <&gpio3>;
> -		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +		interrupts-extended = <&gpio3 2 IRQ_TYPE_LEVEL_LOW>;
>  		default-input = <0>;
>  
>  		ports {
> @@ -114,8 +113,8 @@ video-receiver at 70 {
>  		       0x60 0x61 0x62 0x63 0x64 0x65>;
>  		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
>  			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
> -		interrupt-parent = <&gpio3>;
> -		interrupts = <03 IRQ_TYPE_LEVEL_LOW>, <04 IRQ_TYPE_LEVEL_LOW>;
> +		interrupts-extended = <&gpio3 3 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gpio3 4 IRQ_TYPE_LEVEL_LOW>;
>  		interrupt-names = "intrq1", "intrq2";
>  
>  		ports {
> diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> index 08f4e35c414ebbcf..269cda6fae21de70 100644
> --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
> @@ -544,10 +544,9 @@ video-receiver at 70 {
>  		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
>  			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
>  
> -		interrupt-parent = <&gpio6>;
> +		interrupts-extended = <&gpio6 30 IRQ_TYPE_LEVEL_LOW>,
> +				      <&gpio6 31 IRQ_TYPE_LEVEL_LOW>;
>  		interrupt-names = "intrq1", "intrq2";
> -		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
> -			     <31 IRQ_TYPE_LEVEL_LOW>;
>  
>  		ports {
>  			#address-cells = <1>;
> -- 
> 2.34.1
> 
> 

-- 
Kind Regards,
Niklas Söderlund



More information about the linux-arm-kernel mailing list