[PATCH v1 11/11] riscv: dts: microchip: convert clock and reset to use syscon

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

The "subblock" clocks and reset registers on PolarFire SoC are located
in the mss-top-sysreg region, alongside pinctrl and interrupt control
functionality. Re-write the devicetree to describe the sys explicitly,
as its own node, rather than as a region of the clock node.
Correspondingly, the phandles to the reset controller must be updated to
the new provider. The drivers will continue to support the old way of
doing things.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index f8a45e4f00a0d..08aa4fe03fd30 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -251,11 +251,9 @@ pdma: dma-controller at 3000000 {
 			#dma-cells = <1>;
 		};
 
-		clkcfg: clkcfg at 20002000 {
-			compatible = "microchip,mpfs-clkcfg";
-			reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
-			clocks = <&refclk>;
-			#clock-cells = <1>;
+		mss_top_sysreg: syscon at 20002000 {
+			compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd";
+			reg = <0x0 0x20002000 0x0 0x1000>;
 			#reset-cells = <1>;
 		};
 
@@ -452,7 +450,7 @@ mac0: ethernet at 20110000 {
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
-			resets = <&clkcfg CLK_MAC0>;
+			resets = <&mss_top_sysreg CLK_MAC0>;
 			status = "disabled";
 		};
 
@@ -466,7 +464,7 @@ mac1: ethernet at 20112000 {
 			local-mac-address = [00 00 00 00 00 00];
 			clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>;
 			clock-names = "pclk", "hclk";
-			resets = <&clkcfg CLK_MAC1>;
+			resets = <&mss_top_sysreg CLK_MAC1>;
 			status = "disabled";
 		};
 
@@ -550,5 +548,12 @@ syscontroller_qspi: spi at 37020100 {
 			clocks = <&scbclk>;
 			status = "disabled";
 		};
+
+		clkcfg: clkcfg at 3e001000 {
+			compatible = "microchip,mpfs-clkcfg";
+			reg = <0x0 0x3e001000 0x0 0x1000>;
+			clocks = <&refclk>;
+			#clock-cells = <1>;
+		};
 	};
 };
-- 
2.45.2