[PATCH v5 3/6] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()
Lorenzo Bianconi
lorenzo at kernel.org
Fri Nov 29 15:20:12 PST 2024
In order to make the code more readable, the reset_control_bulk_assert()
for PHY reset lines is moved to make it pair with
reset_control_bulk_deassert() in mtk_pcie_power_up() and
mtk_pcie_en7581_power_up(). The same change is done for
reset_control_assert() used to assert MAC reset line.
Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
complete PCIe reset on MediaTek controller.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
drivers/pci/controller/pcie-mediatek-gen3.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index 3cfcb45d31508142d28d338ff213f70de9b4e608..6c5e1fb16d17de0325d66277e0508b781fe45112 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -125,6 +125,8 @@
#define MAX_NUM_PHY_RESETS 3
+#define PCIE_MTK_RESET_TIME_US 10
+
/* Time in ms needed to complete PCIe reset on EN7581 SoC */
#define PCIE_EN7581_RESET_TIME_MS 100
@@ -913,9 +915,14 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
u32 val;
/*
- * Wait for the time needed to complete the bulk assert in
- * mtk_pcie_setup for EN7581 SoC.
+ * The controller may have been left out of reset by the bootloader
+ * so make sure that we get a clean start by asserting resets here.
*/
+ reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
+ pcie->phy_resets);
+ reset_control_assert(pcie->mac_reset);
+
+ /* Wait for the time needed to complete the reset lines assert. */
mdelay(PCIE_EN7581_RESET_TIME_MS);
err = phy_init(pcie->phy);
@@ -986,6 +993,15 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
struct device *dev = pcie->dev;
int err;
+ /*
+ * The controller may have been left out of reset by the bootloader
+ * so make sure that we get a clean start by asserting resets here.
+ */
+ reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
+ pcie->phy_resets);
+ reset_control_assert(pcie->mac_reset);
+ usleep_range(PCIE_MTK_RESET_TIME_US, 2 * PCIE_MTK_RESET_TIME_US);
+
/* PHY power on and enable pipe clock */
err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
if (err) {
@@ -1070,14 +1086,6 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
* counter since the bulk is shared.
*/
reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
- /*
- * The controller may have been left out of reset by the bootloader
- * so make sure that we get a clean start by asserting resets here.
- */
- reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
-
- reset_control_assert(pcie->mac_reset);
- usleep_range(10, 20);
/* Don't touch the hardware registers before power up */
err = pcie->soc->power_up(pcie);
--
2.47.0
More information about the linux-arm-kernel
mailing list