[PATCH v6 1/5] media: dt-bindings: Add qcom,sc7280-camss

[Bryan O'Donoghue]

On 27/11/2024 12:57, Vladimir Zapolskiy wrote:
>>
>> +        camss: camss at acaf000 {
>> +            compatible = "qcom,sc7280-camss";
>> +
>> +            reg = <0x0 0x0acb3000 0x0 0x1000>,
>> +                  <0x0 0x0acc8000 0x0 0x1000>,
> 
> Unsurprisingly above is the error, which has been already reported for
> enumerous amount of times, I wish to stop poking it eventually, please
> reference to the previously given review comments and fix all of them
> before sending a new version of the changes.

So just to be clear what is wrong here because it may not be clear.

1. Sort by IP name
2. The first address @ reg should be equal to the address @ camss

-> Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml

     camss: camss at 1b00020 {
         compatible = "qcom,msm8953-camss";

         reg = <0x1b00020 0x10>,
               <0x1b30000 0x100>,
               <0x1b30400 0x100>,
               <0x1b30800 0x100>,
               <0x1b34000 0x1000>,
               <0x1b00030 0x4>,
               <0x1b35000 0x1000>,
               <0x1b00038 0x4>,
               <0x1b36000 0x1000>,
               <0x1b00040 0x4>,
               <0x1b31000 0x500>,
               <0x1b10000 0x1000>,
               <0x1b14000 0x1000>;
         reg-names = "csi_clk_mux",
                     "csid0",
                     "csid1",
                     "csid2",
                     "csiphy0",
                     "csiphy0_clk_mux",
                     "csiphy1",
                     "csiphy1_clk_mux",
                     "csiphy2",
                     "csiphy2_clk_mux",
                     "ispif",
                     "vfe0",
                     "vfe1";
So:

         camss: camss at acaf000 {
             compatible = "qcom,sc7280-camss";

             reg = <0x0 0x0acaf000 0x0 0x4000>,
                   <0x0 0x0acb3000 0x0 0x1000>,
                   <0x0 0x0acc8000 0x0 0x1000>,
                   <0x0 0x0acba000 0x0 0x1000>,
                   <0x0 0x0accf000 0x0 0x1000>,
                   <0x0 0x0acc1000 0x0 0x1000>,
                   <0x0 0x0ace0000 0x0 0x2000>,
                   <0x0 0x0ace2000 0x0 0x2000>,
                   <0x0 0x0ace4000 0x0 0x2000>,
                   <0x0 0x0ace6000 0x0 0x2000>,
                   <0x0 0x0ace8000 0x0 0x2000>,
                   <0x0 0x0acc4000 0x0 0x4000>,
                   <0x0 0x0acb6000 0x0 0x4000>,
                   <0x0 0x0accb000 0x0 0x4000>,
                   <0x0 0x0acbd000 0x0 0x4000>;
             reg-names = "vfe0",
                         "csid0",
                         "csid0_lite",
                         "csid1",
                         "csid1_lite",
                         "csid2",
                         "csiphy0",
                         "csiphy1",
                         "csiphy2",
                         "csiphy3",
                         "csiphy4",
                         "vfe0_lite",
                         "vfe1",
                         "vfe1_lite",
                         "vfe2";
:(
---
bod