[PATCH v2 03/11] dt-bindings: regulator: pca9450: Document nxp,sd-vsel-fixed-low property for LDO5

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

This new property can be used for boards which have the SD_VSEL tied
to a fixed low level. The voltage of LDO5 is therefore only controlled
by writing to the LDO5CTRL_L register.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
Changes for v2:
* new patch
---
 .../bindings/regulator/nxp,pca9450-regulator.yaml           | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 5d0d684186c96..0e19c54aa5f8a 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -49,6 +49,12 @@ properties:
           Properties for single LDO5 regulator.
 
         properties:
+          nxp,sd-vsel-fixed-low:
+            type: boolean
+            description:
+              Let the driver know that SD_VSEL is hardwired to low level and
+              there is no GPIO to get the actual value from.
+
           sd-vsel-gpios:
             description:
               GPIO that can be used to read the current status of the SD_VSEL
-- 
2.46.1