[Upstream] [PATCH 09/15] arm64: dts: imx8mm: move bulk of rtc properties to carrierboards

Andrej Picej andrej.picej at norik.com
Wed Nov 27 03:01:55 PST 2024


Hi Teresa,

On 27. 11. 24 11:34, Teresa Remmet wrote:
> Hello Andrej,
> 
> Am Montag, dem 25.11.2024 um 09:18 +0100 schrieb Andrej Picej:
>> From: Yannic Moog <y.moog at phytec.de>
>>
>> Move properties from SoM's dtsi to carrierboard's dts as they are
>> actually defined by the carrier board design.
>>
>> Signed-off-by: Yannic Moog <y.moog at phytec.de>
>> Signed-off-by: Andrej Picej <andrej.picej at norik.com>
>> ---
>>   arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts | 4 ++++
>>   arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi       | 4 ----
>>   arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts    | 4 ++++
>>   3 files changed, 8 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-
>> rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
>> index 7aaf705c7e47..f5f503c3c6b9 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
>> @@ -221,6 +221,10 @@ &pcie_phy {
>>   
>>   /* RTC */
>>   &rv3028 {
>> +       interrupt-parent = <&gpio1>;
>> +       interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
>> +       pinctrl-0 = <&pinctrl_rtc>;
> 
> You should also move the pinctrl settings to the carrier boards.
> As the pin can be used differently and should not be defined by the
> SoM.

Ok will fix this in v2. Thanks.

BR,
Andrej.

> 
> Thanks,
> Teresa
> 
>> +       pinctrl-names = "default";
>>          aux-voltage-chargeable = <1>;
>>          trickle-resistor-ohms = <3000>;
>>          wakeup-source;
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
>> b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
>> index cced82226c6d..fdfe28780d6f 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
>> @@ -301,10 +301,6 @@ eeprom at 51 {
>>          /* RTC */
>>          rv3028: rtc at 52 {
>>                  compatible = "microcrystal,rv3028";
>> -               interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
>> -               interrupt-parent = <&gpio1>;
>> -               pinctrl-names = "default";
>> -               pinctrl-0 = <&pinctrl_rtc>;
>>                  reg = <0x52>;
>>          };
>>   };
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
>> b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
>> index c9bf4ac254bb..b7b18d5a4f68 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
>> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts
>> @@ -215,6 +215,10 @@ &pwm4 {
>>   
>>   /* RTC */
>>   &rv3028 {
>> +       interrupt-parent = <&gpio1>;
>> +       interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
>> +       pinctrl-0 = <&pinctrl_rtc>;
>> +       pinctrl-names = "default";
>>          aux-voltage-chargeable = <1>;
>>          trickle-resistor-ohms = <3000>;
>>          wakeup-source;
> 



More information about the linux-arm-kernel mailing list