[Upstream] [PATCH 07/15] arm64: dts: imx8mm-phyboard-polis: Set RTC as wakeup-source

[Teresa Remmet]

Am Montag, dem 25.11.2024 um 09:18 +0100 schrieb Andrej Picej:
> RV-3028 RTC can be used to wakeup the system on phyBOARD-Polis-
> i.MX8MM,
> mark the device as wakeup source.
> 
> Signed-off-by: Andrej Picej <andrej.picej at norik.com>
Reviewed-by: Teresa Remmet <t.remmet at phytec.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-
> rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
> index 6c95257119d6..7aaf705c7e47 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
> @@ -223,6 +223,7 @@ &pcie_phy {
>  &rv3028 {
>         aux-voltage-chargeable = <1>;
>         trickle-resistor-ohms = <3000>;
> +       wakeup-source;
>  };
>  
>  &snvs_pwrkey {

-- 
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany

Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber,
Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 |
Finanzamt Mainz | St.Nr. 26/665/00608, DE 149059855