[PATCH v1 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings

[Rob Herring (Arm)]

On Tue, 26 Nov 2024 14:00:00 +0100, Christian Bruel wrote:
> Document the bindings for STM32MP25 PCIe Controller configured in
> root complex mode.
> 
> Supports 4 legacy interrupts and MSI interrupts from the ARM
> GICv2m controller.
> 
> STM32 PCIe may be in a power domain which is the case for the STM32MP25
> based boards.
> 
> Supports wake# from wake-gpios
> 
> Signed-off-by: Christian Bruel <christian.bruel at foss.st.com>
> ---
>  .../bindings/pci/st,stm32-pcie-common.yaml    | 45 +++++++++
>  .../bindings/pci/st,stm32-pcie-host.yaml      | 99 +++++++++++++++++++
>  2 files changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml:45:1: [warning] too many blank lines (2 > 1) (empty-lines)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml: 'oneOf' conditional failed, one must be fixed:
	'unevaluatedProperties' is a required property
	'additionalProperties' is a required property
	hint: Either unevaluatedProperties or additionalProperties must be present
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241126130004.1570091-2-christian.bruel@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.