[PATCH v2 2/2] mmc: mtk-sd: Add support for ignoring cmd response CRC

[Andy-ld Lu]

The current process flow does not handle MMC requests that are indicated
to ignore the command response CRC. For instance, cmd12 and cmd48 from
mmc_cqe_recovery() are marked to ignore CRC, but they are not matched to
the appropriate response type in msdc_cmd_find_resp(). As a result, they
are defaulted to 'MMC_RSP_NONE', which means no response is expected.

This commit applies the flag 'MMC_RSP_R1B_NO_CRC' to fix the response type
setting in msdc_cmd_find_resp() and adds the logic to ignore CRC in
msdc_cmd_done().

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Signed-off-by: Andy-ld Lu <andy-ld.lu at mediatek.com>
---
 drivers/mmc/host/mtk-sd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index efb0d2d5716b..e2c385853eef 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1097,11 +1097,12 @@ static inline u32 msdc_cmd_find_resp(struct msdc_host *host,
 	u32 resp;
 
 	switch (mmc_resp_type(cmd)) {
-		/* Actually, R1, R5, R6, R7 are the same */
+	/* Actually, R1, R5, R6, R7 are the same */
 	case MMC_RSP_R1:
 		resp = 0x1;
 		break;
 	case MMC_RSP_R1B:
+	case MMC_RSP_R1B_NO_CRC:
 		resp = 0x7;
 		break;
 	case MMC_RSP_R2:
@@ -1351,7 +1352,8 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 			 * CRC error.
 			 */
 			msdc_reset_hw(host);
-		if (events & MSDC_INT_RSPCRCERR) {
+		if (events & MSDC_INT_RSPCRCERR &&
+		    mmc_resp_type(cmd) != MMC_RSP_R1B_NO_CRC) {
 			cmd->error = -EILSEQ;
 			host->error |= REQ_CMD_EIO;
 		} else if (events & MSDC_INT_CMDTMO) {
-- 
2.46.0