[PATCH v3 2/2] arm64: dts: mediatek: mt8186: Add Starmie device

[AngeloGioacchino Del Regno]

Il 26/11/24 11:36, Wojciech Macek ha scritto:
> Add support for Starmie Chromebooks.
> 
> Signed-off-by: Wojciech Macek <wmacek at chromium.org>
> ---
> Changelog v3-v2:
>   - Cleaned up DTS
>     - Re-using dsi_out node
>     - Removed unnecessary delete-nodes
>     - Moved touchpads to per-board dts
>     - Modified 3.3/6V power regulator node
> Changelog v2-v1:
>   - No changes
>   arch/arm64/boot/dts/mediatek/Makefile         |   2 +
>   .../mediatek/mt8186-corsola-starmie-sku0.dts  |  31 ++
>   .../mediatek/mt8186-corsola-starmie-sku1.dts  |  31 ++
>   .../dts/mediatek/mt8186-corsola-starmie.dtsi  | 465 ++++++++++++++++++
>   4 files changed, 529 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku0.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie-sku1.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-starmie.dtsi
> 

..snip..
> +/*
> + * Battery on Starmie is using a different address than default.
> + */
> +&battery {

I didn't ask you to do it this way, and that was for a good reason.

Besides, you haven't run dtbs_check before sending this.
Give it a go and you'll see why.

Regards,
Angelo

> +	reg = <0xf>;
> +};