[PATCH v12 2/8] dt-bindings: media: platform: visconti: Add Toshiba Visconti Video Input Interface

[Yuji Ishikawa]

Adds the Device Tree binding documentation that allows to describe
the Video Input Interface found in Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa at toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu at toshiba.co.jp>
---
Changelog v2:
- no change

Changelog v3:
- no change

Changelog v4:
- fix style problems at the v3 patch
- remove "index" member
- update example

Changelog v5:
- no change

Changelog v6:
- add register definition of BUS-IF and MPU

Changelog v7:
- remove trailing "bindings" from commit header message
- remove trailing "Device Tree Bindings" from title
- fix text wrapping of description
- change compatible to visconti5-viif
- explicitly define allowed properties for port::endpoint

Changelog v8:
- Suggestion from Krzysztof Kozlowski
  - rename bindings description file
  - use block style array instead of inline style
  - remove clock-lane (as it is fixed at position 0)
  - update sample node's name
  - use lowercase hex for literals
- Suggestion from Laurent Pinchart
  - update description message port::description
  - remove port::endpoint::bus-type as it is fixed to <4>
  - remove port::endpoint::clock-lanes from example
  - add port::endpoint::data-lanes to required parameters list
  - fix sequence of data-lanes: <1 2 3 4> because current driver does not support data reordering
  - update port::endpoint::data-lanes::description
  - remove redundant type definition for port::endpoint::data-lanes

Changelog v9:
- place "required" after "properties"
- dictionary ordering of properties

Changelog v10:
- no change

Changelog v11:
- no change

Changelog v12:
- remove property "clock-noncontinuous" as VIIF switches both modes automatically
- remove property "link-frequencies" as VIIF does not use the information
- remove reg[2] and interrupts[3] which are used for CSI2RX driver
- update example to refer csi2rx for remote-endpoint

 .../media/toshiba,visconti5-viif.yaml         | 95 +++++++++++++++++++
 1 file changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml

diff --git a/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml b/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml
new file mode 100644
index 000000000000..ef0452a47e98
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/toshiba,visconti5-viif.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/toshiba,visconti5-viif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC Video Input Interface
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu at toshiba.co.jp>
+
+description: |-
+  Toshiba Visconti5 SoC Video Input Interface (VIIF) receives videostream
+  from MIPI CSI-2 receiver device, processes the stream with image signal
+  processors (L1ISP, L2ISP), then stores pictures to main memory.
+
+properties:
+  compatible:
+    const: toshiba,visconti5-viif
+
+  reg:
+    items:
+      - description: Registers for capture control
+      - description: Registers for bus interface unit control
+      - description: Registers for Memory Protection Unit
+
+  interrupts:
+    items:
+      - description: Sync Interrupt
+      - description: Status (Error) Interrupt
+      - description: L1ISP Interrupt
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI-2 input port, with a single endpoint connected to the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            description: VIIF supports 1, 2, 3 or 4 data lanes
+            minItems: 1
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+          - remote-endpoint
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        video at 1c000000 {
+            compatible = "toshiba,visconti5-viif";
+            reg = <0 0x1c000000 0 0x6000>,
+                  <0 0x1c00e000 0 0x1000>,
+                  <0 0x2417a000 0 0x1000>;
+            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+
+            port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                csi_in0: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&csi2rx_out0>;
+                };
+            };
+        };
+    };
-- 
2.25.1