[PATCH v2 03/12] can: sun4i_can: continue to use likely() to check skb
Dario Binacchi
dario.binacchi at amarulasolutions.com
Fri Nov 22 14:15:44 PST 2024
Throughout the sun4i_can_err() function, the likely() macro is used to
check the skb buffer, except in one instance. This patch makes the code
consistent by using the macro in that case as well.
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---
Changes in v2:
- Added in v2
drivers/net/can/sun4i_can.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 17f94cca93fb..840b972498c1 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -570,7 +570,7 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc, u8 status)
else
state = CAN_STATE_ERROR_ACTIVE;
}
- if (skb && state != CAN_STATE_BUS_OFF) {
+ if (likely(skb) && state != CAN_STATE_BUS_OFF) {
cf->can_id |= CAN_ERR_CNT;
cf->data[6] = txerr;
cf->data[7] = rxerr;
--
2.43.0
More information about the linux-arm-kernel
mailing list