[PATCH v6 08/10] PCI: imx6: Use dwc common suspend resume method

[Manivannan Sadhasivam]

On Mon, Nov 18, 2024 at 03:00:44AM +0000, Hongxing Zhu wrote:

[...]

> > > -static void imx_pcie_pm_turnoff(struct imx_pcie *imx_pcie) -{
> > > -	struct device *dev = imx_pcie->pci->dev;
> > > -
> > > -	/* Some variants have a turnoff reset in DT */
> > > -	if (imx_pcie->turnoff_reset) {
> > > -		reset_control_assert(imx_pcie->turnoff_reset);
> > > -		reset_control_deassert(imx_pcie->turnoff_reset);
> > 
> > Where these are handled in imx_pcie_pme_turn_off()? If you removed them
> > intentionally for a reason, it should be mentioned in commit message.
> > 
> How about add the following descriptions into commit message?
> SRC interface is used to do the PME_TURN_OFF operations before. It's not very

What is SRC?

>  suitable. Now DWC common driver can do the PME_TURN_OFF kick off. Switch to
>  this common methods, and remove the useless turnoff_reset manipulate codes.
> 

Hmm, so 'turnoff_reset' is used to send PME_Turn_Off msg?

If so, then you need to say in such a way that the reader should understand
'turnoff_reset' was used to send PME_Turn_Off and since the DWC implementation
is used, it is not needed now.

- Mani

-- 
மணிவண்ணன் சதாசிவம்