[PATCH 1/2] ARM: dts: microchip: sam9x7: Move i2c address/size to dtsi

Mihai Sain mihai.sain at microchip.com
Fri Nov 22 00:05:22 PST 2024


Since these properties are common for all i2c subnodes,
move them to SoC dtsi from board dts.

Signed-off-by: Mihai Sain <mihai.sain at microchip.com>
---
 .../dts/microchip/at91-sam9x75_curiosity.dts  |  2 --
 arch/arm/boot/dts/microchip/sam9x7.dtsi       | 26 +++++++++++++++++++
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
index 87b6ea97590b..d453800f8e35 100644
--- a/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts
@@ -88,8 +88,6 @@ &flx6 {
 };
 
 &i2c6 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flx6_default>;
 	i2c-analog-filter;
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
index beb1f34b38d3..aedba0a8318f 100644
--- a/arch/arm/boot/dts/microchip/sam9x7.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -151,6 +151,8 @@ i2c4: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -220,6 +222,8 @@ i2c5: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -312,6 +316,8 @@ i2c11: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -362,6 +368,8 @@ i2c12: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -533,6 +541,8 @@ i2c6: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -583,6 +593,8 @@ i2c7: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -633,6 +645,8 @@ i2c8: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -702,6 +716,8 @@ i2c0: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -771,6 +787,8 @@ i2c1: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -840,6 +858,8 @@ i2c2: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -909,6 +929,8 @@ i2c3: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -984,6 +1006,8 @@ i2c9: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
@@ -1034,6 +1058,8 @@ i2c10: i2c at 600 {
 				compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				dmas = <&dma0
 					(AT91_XDMAC_DT_MEM_IF(0) |
-- 
2.47.0




More information about the linux-arm-kernel mailing list