[PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp

[Daniel Baluta]

On Thu, Nov 21, 2024 at 1:33 PM Peng Fan <peng.fan at nxp.com> wrote:
>
> > Subject: [PATCH 4/5] arm64: dts: imx8mp: Add fsl,dsp-ctrl property for
> > dsp
> >
> > Audio block control contains a set of registers some of them used for
> > DSP configuration.
> >
> > Drivers (rproc, SOF) are using fsl,dsp-ctrl property to access those
> > registers in order to control the operations of the DSP (e.g for start,
> > reset, etc).
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta at nxp.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 3 ++-
> >  1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 41ff40ab5da2..fa4ff75af12d 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1616,7 +1616,7 @@ sdma2: dma-controller at 30e10000 {
> >                       };
> >
> >                       audio_blk_ctrl: clock-controller at 30e20000 {
> > -                             compatible = "fsl,imx8mp-audio-blk-
> > ctrl";
> > +                             compatible = "fsl,imx8mp-audio-blk-
> > ctrl", "syscon";
>
> This requires binding update as I recall.

Yes, indeed. Will update in v2.