[PATCH 0/5] Configure imx8mp dsp node for rproc usage

[Daniel Baluta]

DSP found in i.MX8MP SOC can be used by multiple frameworks in order to
enable various applications:
	- rproc/rpmsg framework, used to load for example Zephyr samples
	- Sound Open Firmware, used to enable various audio processing
	  pipelines.

Current dsp node was configured with SOF in mind but it doesn't work
well with imx8mp-evk dts. SOF controls audio IPs from firmware side
while imx8mp-evk preffers to control audio IPs from Linux side.

So, configure 'dsp' node to be used with rproc scenario and later will
add a separate dts or an overlay to configure the node for SOF.

This patch series configures and enables dsp node to be used with rproc.

Daniel Baluta (5):
  arm64: dts: imx8mp: Add mu2 root clock
  arm64: dts: imx8mp: Configure dsp node for rproc usage
  arm64: dts: imx8mp: Add DSP clocks
  arm64: dts: imx8mp: Add fsl,dsp-ctrl property for dsp
  arm64: dts: Add dsp rproc related mem regions

 arch/arm64/boot/dts/freescale/imx8mp-evk.dts |  6 +++++
 arch/arm64/boot/dts/freescale/imx8mp.dtsi    | 23 ++++++++++++--------
 2 files changed, 20 insertions(+), 9 deletions(-)

-- 
2.43.0