[PATCH v2 1/2] dt-bindings: reset: mediatek: Add mt8188 SMI reset control binding

[AngeloGioacchino Del Regno]

Il 20/11/24 07:32, Friday Yang ha scritto:
> From: "Friday Yang" <friday.yang at mediatek.com>
> 
> To support SMI clamp and reset operation in genpd callback, add
> SMI LARB reset controller in the bindings. Add index in
> mt8188-resets.h to query the reset signal in the SMI reset
> control driver.
> 
> Signed-off-by: Friday Yang <friday.yang at mediatek.com>
> ---
>   .../bindings/reset/mediatek,smi-reset.yaml    | 53 +++++++++++++++++++
>   include/dt-bindings/reset/mt8188-resets.h     | 11 ++++
>   2 files changed, 64 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/reset/mediatek,smi-reset.yaml
> 
> diff --git a/Documentation/devicetree/bindings/reset/mediatek,smi-reset.yaml b/Documentation/devicetree/bindings/reset/mediatek,smi-reset.yaml
> new file mode 100644
> index 000000000000..77a6197a9846
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/mediatek,smi-reset.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2024 MediaTek Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/mediatek,smi-reset.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek SMI Reset Controller
> +
> +maintainers:
> +  - Friday Yang <friday.yang at mediatek.com>
> +
> +description: |
> +  This reset controller node is used to perform reset management
> +  of SMI larbs on MediaTek platform. It is used to implement various
> +  reset functions required when SMI larbs apply clamp operation.
> +
> +  For list of all valid reset indices see
> +    <dt-bindings/reset/mt8188-resets.h> for MT8188.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - mediatek,mt8188-smi-reset
> +
> +  "#reset-cells":
> +    const: 1
> +    description:
> +      The cell should be the device ID. SMI reset controller driver could
> +      query the reset signal of each SMI larb by device ID.
> +
> +  mediatek,larb-rst:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle of each subsys clock controller. SMI larbs are located in
> +      these subsys. SMI needs to parse the node of each subsys clock
> +      controller to get the register address, and then apply the reset
> +      operation.
> +
> +required:
> +  - compatible
> +  - "#reset-cells"
> +  - mediatek,larb-rst
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    reset-controller {
> +        compatible = "mediatek,mt8188-smi-reset";
> +        #reset-cells = <1>;
> +        mediatek,larb-rst = <&imgsys1_dip_top>;

I don't understand why would you be unable to add the SMI resets to the already
currently supported reset code in the clock-controller driver itself, like done
with literally all of the other clock controllers.

Please clarify.

Regards,
Angelo