[PATCH v2 4/5] clk: meson: add support for the A5 SoC PLL clock
Xianwei Zhao via B4 Relay
devnull+xianwei.zhao.amlogic.com at kernel.org
Tue Nov 19 23:01:16 PST 2024
From: Chuan Liu <chuan.liu at amlogic.com>
Add the PLL clock controller driver for the Amlogic A5 SoC family.
Signed-off-by: Chuan Liu <chuan.liu at amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
---
drivers/clk/meson/Kconfig | 14 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/a5-pll.c | 543 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 558 insertions(+)
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 78f648c9c97d..3c97b3a1649d 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -132,6 +132,20 @@ config COMMON_CLK_A1_PERIPHERALS
device, A1 SoC Family. Say Y if you want A1 Peripherals clock
controller to work.
+config COMMON_CLK_A5_PLL
+ tristate "Amlogic A5 PLL clock controller"
+ depends on ARM64
+ default y
+ imply COMMON_CLK_SCMI
+ select COMMON_CLK_MESON_REGMAP
+ select COMMON_CLK_MESON_PLL
+ select COMMON_CLK_MESON_MPLL
+ select COMMON_CLK_MESON_CLKC_UTILS
+ help
+ Support for the PLL clock controller on Amlogic AV40x device, AKA A5.
+ Say Y if you want the board to work, because PLLs are the parent
+ of most peripherals.
+
config COMMON_CLK_C3_PLL
tristate "Amlogic C3 PLL clock controller"
depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index bc56a47931c1..fc4b8a723145 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
+obj-$(CONFIG_COMMON_CLK_A5_PLL) += a5-pll.o
obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
diff --git a/drivers/clk/meson/a5-pll.c b/drivers/clk/meson/a5-pll.c
new file mode 100644
index 000000000000..f18700dfd055
--- /dev/null
+++ b/drivers/clk/meson/a5-pll.c
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic A5 PLL Controller Driver
+ *
+ * Copyright (c) 2024 Amlogic, inc.
+ * Author: Chuan Liu <chuan.liu at amlogic.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include "clk-regmap.h"
+#include "clk-pll.h"
+#include "clk-mpll.h"
+#include "meson-clkc-utils.h"
+#include <dt-bindings/clock/amlogic,a5-pll-clkc.h>
+
+#define ANACTRL_GP0PLL_CTRL0 0x80
+#define ANACTRL_GP0PLL_CTRL1 0x84
+#define ANACTRL_GP0PLL_CTRL2 0x88
+#define ANACTRL_GP0PLL_CTRL3 0x8c
+#define ANACTRL_GP0PLL_CTRL4 0x90
+#define ANACTRL_GP0PLL_CTRL5 0x94
+#define ANACTRL_GP0PLL_CTRL6 0x98
+#define ANACTRL_HIFIPLL_CTRL0 0x100
+#define ANACTRL_HIFIPLL_CTRL1 0x104
+#define ANACTRL_HIFIPLL_CTRL2 0x108
+#define ANACTRL_HIFIPLL_CTRL3 0x10c
+#define ANACTRL_HIFIPLL_CTRL4 0x110
+#define ANACTRL_HIFIPLL_CTRL5 0x114
+#define ANACTRL_HIFIPLL_CTRL6 0x118
+#define ANACTRL_MPLL_CTRL0 0x180
+#define ANACTRL_MPLL_CTRL1 0x184
+#define ANACTRL_MPLL_CTRL2 0x188
+#define ANACTRL_MPLL_CTRL3 0x18c
+#define ANACTRL_MPLL_CTRL4 0x190
+#define ANACTRL_MPLL_CTRL5 0x194
+#define ANACTRL_MPLL_CTRL6 0x198
+#define ANACTRL_MPLL_CTRL7 0x19c
+#define ANACTRL_MPLL_CTRL8 0x1a0
+
+static struct clk_fixed_factor mpll_prediv = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll_prediv",
+ .ops = &clk_fixed_factor_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "fix_dco"
+ },
+ .num_parents = 1,
+ },
+};
+
+static const struct reg_sequence mpll0_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL2, .def = 0x40000033 },
+};
+
+static struct clk_regmap mpll0_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL1,
+ .shift = 29,
+ .width = 1,
+ },
+ .init_regs = mpll0_init_regs,
+ .init_count = ARRAY_SIZE(mpll0_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap mpll0 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL1,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &mpll0_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence mpll1_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL4, .def = 0x40000033 },
+};
+
+static struct clk_regmap mpll1_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL3,
+ .shift = 29,
+ .width = 1,
+ },
+ .init_regs = mpll1_init_regs,
+ .init_count = ARRAY_SIZE(mpll1_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap mpll1 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL3,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &mpll1_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence mpll2_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL6, .def = 0x40000033 },
+};
+
+static struct clk_regmap mpll2_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL5,
+ .shift = 29,
+ .width = 1,
+ },
+ .init_regs = mpll2_init_regs,
+ .init_count = ARRAY_SIZE(mpll2_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap mpll2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL5,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &mpll2_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence mpll3_init_regs[] = {
+ { .reg = ANACTRL_MPLL_CTRL8, .def = 0x40000033 },
+};
+
+static struct clk_regmap mpll3_div = {
+ .data = &(struct meson_clk_mpll_data){
+ .sdm = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 30,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 20,
+ .width = 9,
+ },
+ .ssen = {
+ .reg_off = ANACTRL_MPLL_CTRL7,
+ .shift = 29,
+ .width = 1,
+ },
+ .init_regs = mpll3_init_regs,
+ .init_count = ARRAY_SIZE(mpll3_init_regs),
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3_div",
+ .ops = &meson_clk_mpll_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &mpll_prediv.hw
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap mpll3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = ANACTRL_MPLL_CTRL7,
+ .bit_idx = 31,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_hws = (const struct clk_hw *[]) { &mpll3_div.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence gp0_init_regs[] = {
+ { .reg = ANACTRL_GP0PLL_CTRL2, .def = 0x00000000 },
+ { .reg = ANACTRL_GP0PLL_CTRL3, .def = 0x6a295c00 },
+ { .reg = ANACTRL_GP0PLL_CTRL4, .def = 0x65771290 },
+ { .reg = ANACTRL_GP0PLL_CTRL5, .def = 0x3927200a },
+ { .reg = ANACTRL_GP0PLL_CTRL6, .def = 0x54540000 }
+};
+
+static const struct pll_mult_range gp0_pll_mult_range = {
+ .min = 125,
+ .max = 250,
+};
+
+static struct clk_regmap gp0_pll_dco = {
+ .data = &(struct meson_clk_pll_data) {
+ .en = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .frac = {
+ .reg_off = ANACTRL_GP0PLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .n = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_GP0PLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &gp0_pll_mult_range,
+ .init_regs = gp0_init_regs,
+ .init_count = ARRAY_SIZE(gp0_init_regs),
+ .frac_max = 100000,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gp0_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal_24m",
+ },
+ .num_parents = 1,
+ },
+};
+
+/* The maximum frequency divider supports is 32, not 128(2^7) */
+static const struct clk_div_table gp0_pll_od_table[] = {
+ { 0, 1 },
+ { 1, 2 },
+ { 2, 4 },
+ { 3, 8 },
+ { 4, 16 },
+ { 5, 32 },
+ { /* sentinel */ }
+};
+
+static struct clk_regmap gp0_pll = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_GP0PLL_CTRL0,
+ .shift = 16,
+ .width = 3,
+ .table = gp0_pll_od_table,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "gp0_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &gp0_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct reg_sequence hifi_init_regs[] = {
+ { .reg = ANACTRL_HIFIPLL_CTRL2, .def = 0x00000000 },
+ { .reg = ANACTRL_HIFIPLL_CTRL3, .def = 0x6a295c00 },
+ { .reg = ANACTRL_HIFIPLL_CTRL4, .def = 0x65771290 },
+ { .reg = ANACTRL_HIFIPLL_CTRL5, .def = 0x3927200a },
+ { .reg = ANACTRL_HIFIPLL_CTRL6, .def = 0x54540000 }
+};
+
+static const struct pll_mult_range hifi_pll_mult_range = {
+ .min = 125,
+ .max = 250,
+};
+
+static struct clk_regmap hifi_pll_dco = {
+ .data = &(struct meson_clk_pll_data) {
+ .en = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .frac = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL1,
+ .shift = 0,
+ .width = 17,
+ },
+ .n = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .l = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 31,
+ .width = 1,
+ },
+ .rst = {
+ .reg_off = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 29,
+ .width = 1,
+ },
+ .range = &hifi_pll_mult_range,
+ .init_regs = hifi_init_regs,
+ .init_count = ARRAY_SIZE(hifi_init_regs),
+ .frac_max = 100000,
+ /* NOTE: The original design of hifi_pll is to provide
+ * clock for audio, which requires clock accuracy.
+ * Therefore, flag CLK_MESON_PLL_ROUND_CLOSEST is added
+ * to make the output frequency of hifi_pll closer to
+ * the target frequency.
+ */
+ .flags = CLK_MESON_PLL_ROUND_CLOSEST,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hifi_pll_dco",
+ .ops = &meson_clk_pll_ops,
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xtal_24m",
+ },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap hifi_pll = {
+ .data = &(struct clk_regmap_div_data) {
+ .offset = ANACTRL_HIFIPLL_CTRL0,
+ .shift = 16,
+ /* NOTE: The actual reserved bit width of the od (output
+ * divider) of hifi_pll is 3 bit, but its actual maximum
+ * effective divider factor is 8. It can just use 2 bit and add
+ * flag CLK_DIVIDER_POWER_OF_TWO (max_div = 2^3 = 8).
+ */
+ .width = 2,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "hifi_pll",
+ .ops = &clk_regmap_divider_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &hifi_pll_dco.hw
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_hw *a5_pll_hw_clks[] = {
+ [CLKID_MPLL_PREDIV] = &mpll_prediv.hw,
+ [CLKID_MPLL0_DIV] = &mpll0_div.hw,
+ [CLKID_MPLL0] = &mpll0.hw,
+ [CLKID_MPLL1_DIV] = &mpll1_div.hw,
+ [CLKID_MPLL1] = &mpll1.hw,
+ [CLKID_MPLL2_DIV] = &mpll2_div.hw,
+ [CLKID_MPLL2] = &mpll2.hw,
+ [CLKID_MPLL3_DIV] = &mpll3_div.hw,
+ [CLKID_MPLL3] = &mpll3.hw,
+ [CLKID_GP0_PLL_DCO] = &gp0_pll_dco.hw,
+ [CLKID_GP0_PLL] = &gp0_pll.hw,
+ [CLKID_HIFI_PLL_DCO] = &hifi_pll_dco.hw,
+ [CLKID_HIFI_PLL] = &hifi_pll.hw
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a5_pll_clk_regmaps[] = {
+ &mpll0_div,
+ &mpll0,
+ &mpll1_div,
+ &mpll1,
+ &mpll2_div,
+ &mpll2,
+ &mpll3_div,
+ &mpll3,
+ &gp0_pll_dco,
+ &gp0_pll,
+ &hifi_pll_dco,
+ &hifi_pll
+};
+
+static const struct regmap_config clkc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ANACTRL_MPLL_CTRL8,
+};
+
+static struct meson_clk_hw_data a5_pll_clks = {
+ .hws = a5_pll_hw_clks,
+ .num = ARRAY_SIZE(a5_pll_hw_clks),
+};
+
+static int aml_a5_pll_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *regmap;
+ void __iomem *base;
+ int clkid, ret, i;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &clkc_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Populate regmap for the regmap backed clocks */
+ for (i = 0; i < ARRAY_SIZE(a5_pll_clk_regmaps); i++)
+ a5_pll_clk_regmaps[i]->map = regmap;
+
+ for (clkid = 0; clkid < a5_pll_clks.num; clkid++) {
+ /* array might be sparse */
+ if (!a5_pll_clks.hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev, a5_pll_clks.hws[clkid]);
+ if (ret) {
+ dev_err(dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return devm_of_clk_add_hw_provider(dev, meson_clk_hw_get,
+ &a5_pll_clks);
+}
+
+static const struct of_device_id a5_pll_clkc_match_table[] = {
+ {
+ .compatible = "amlogic,a5-pll-clkc",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, a5_pll_clkc_match_table);
+
+static struct platform_driver a5_pll_driver = {
+ .probe = aml_a5_pll_probe,
+ .driver = {
+ .name = "a5-pll-clkc",
+ .of_match_table = a5_pll_clkc_match_table,
+ },
+};
+module_platform_driver(a5_pll_driver);
+
+MODULE_DESCRIPTION("Amlogic A5 PLL Clock Controller driver");
+MODULE_AUTHOR("Chuan Liu <chuan.liu at amlogic.com>");
+MODULE_LICENSE("GPL");
--
2.37.1
More information about the linux-arm-kernel
mailing list