[PATCH net-next v3 8/8] dt-bindings: net: sparx5: document RGMII delays

Rob Herring robh at kernel.org
Tue Nov 19 10:22:55 PST 2024


On Mon, Nov 18, 2024 at 02:00:54PM +0100, Daniel Machon wrote:
> The lan969x switch device supports two RGMII port interfaces that can be
> configured for MAC level rx and tx delays.
> 
> Document two new properties {rx,tx}-internal-delay-ps. Make them
> required properties, if the phy-mode is one of: rgmii, rgmii_id,
> rgmii-rxid or rgmii-txid. Also specify accepted values.

Doesn't look like they are required to me.

> 
> Signed-off-by: Daniel Machon <daniel.machon at microchip.com>
> ---
>  .../bindings/net/microchip,sparx5-switch.yaml          | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
> index dedfad526666..2e9ef0f7bb4b 100644
> --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
> @@ -129,6 +129,24 @@ properties:
>              minimum: 0
>              maximum: 383
>  
> +          rx-internal-delay-ps:
> +            description: |

Don't need '|' if there is not formatting to preserve.

> +              RGMII Receive Clock Delay defined in pico seconds, used to select
> +              the DLL phase shift between 1000 ps (45 degree shift at 1Gbps) and
> +              3300 ps (147 degree shift at 1Gbps). A value of 0 ps will disable
> +              any delay. The Default is no delay.
> +            enum: [0, 1000, 1700, 2000, 2500, 3000, 3300]
> +            default: 0
> +
> +          tx-internal-delay-ps:
> +            description: |
> +              RGMII Transmit Clock Delay defined in pico seconds, used to select
> +              the DLL phase shift between 1000 ps (45 degree shift at 1Gbps) and
> +              3300 ps (147 degree shift at 1Gbps). A value of 0 ps will disable
> +              any delay. The Default is no delay.
> +            enum: [0, 1000, 1700, 2000, 2500, 3000, 3300]
> +            default: 0
> +
>          required:
>            - reg
>            - phys
> 
> -- 
> 2.34.1
> 



More information about the linux-arm-kernel mailing list