[PATCH v3 1/3] dt-bindings: net: nuvoton: Add schema for Nuvoton MA35 family GMAC
Rob Herring
robh at kernel.org
Tue Nov 19 10:12:37 PST 2024
On Mon, Nov 18, 2024 at 04:27:05PM +0800, Joey Lu wrote:
> Create initial schema for Nuvoton MA35 family Gigabit MAC.
>
> Signed-off-by: Joey Lu <a0987203069 at gmail.com>
> ---
> .../bindings/net/nuvoton,ma35d1-dwmac.yaml | 173 ++++++++++++++++++
> .../devicetree/bindings/net/snps,dwmac.yaml | 1 +
> 2 files changed, 174 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml b/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
> new file mode 100644
> index 000000000000..92cbbcc72f2b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nuvoton,ma35d1-dwmac.yaml
> @@ -0,0 +1,173 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nuvoton,ma35d1-dwmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton DWMAC glue layer controller
> +
> +maintainers:
> + - Joey Lu <yclu4 at nuvoton.com>
> +
> +description:
> + Nuvoton 10/100/1000Mbps Gigabit Ethernet MAC Controller is based on
> + Synopsys DesignWare MAC (version 3.73a).
> +
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
You mean snps,dwmac-3.70a?
> +select:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - nuvoton,ma35d1-dwmac
> + required:
> + - compatible
> +
> +allOf:
> + - $ref: snps,dwmac.yaml#
> +
> +properties:
> + compatible:
> + oneOf:
oneOf is not correct. I think you wanted 'items'.
> + - enum:
> + - nuvoton,ma35d1-dwmac
> + - const: snps,dwmac-3.70a
But you said above the h/w is 3.73a.
Really, I'd prefer to just drop this because it's not useful on its own.
But the driver does check for snps,dwmac-3.70a. All those
of_device_is_compatible() calls in the driver should really be replaced
with static match data structs.
> +
> + reg:
> + description:
> + Register range should be one of the GMAC interface.
Need to define how many entries and what they are if more than 1.
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: MAC clock
> + - description: PTP clock
> +
> + clock-names:
> + items:
> + - const: stmmaceth
> + - const: ptp_ref
> +
> + nuvoton,sys:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to access syscon registers.
> + - description: GMAC interface ID.
> + enum:
> + - 0
> + - 1
> + description:
> + A phandle to the syscon with one argument that configures system registers
> + for MA35D1's two GMACs. The argument specifies the GMAC interface ID.
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + items:
> + - const: stmmaceth
> +
> + phy-mode:
> + enum:
> + - rmii
> + - rgmii
> + - rgmii-id
> + - rgmii-txid
> + - rgmii-rxid
> +
> + phy-handle:
> + $ref: /schemas/types.yaml#/definitions/phandle
The type is already defined. Drop.
> + description:
> + Specifies a reference to a node representing a PHY device.
> +
> + tx-internal-delay-ps:
> + enum: [0, 2000]
> + default: 0
> + description:
> + RGMII TX path delay used only when PHY operates in RGMII mode with
> + internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
> +
> + rx-internal-delay-ps:
> + enum: [0, 2000]
> + default: 0
> + description:
> + RGMII RX path delay used only when PHY operates in RGMII mode with
> + internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
> +
> + mdio:
> + $ref: /schemas/net/mdio.yaml#
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - clock-names
> + - nuvoton,sys
> + - resets
> + - reset-names
> + - phy-mode
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
> + #include <dt-bindings/reset/nuvoton,ma35d1-reset.h>
> + //Example 1
Not a useful comment.
> + gmac0: ethernet at 40120000 {
Drop unused labels.
> + compatible = "nuvoton,ma35d1-dwmac";
> + reg = <0x0 0x40120000 0x0 0x10000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + clocks = <&clk EMAC0_GATE>, <&clk EPLL_DIV8>;
> + clock-names = "stmmaceth", "ptp_ref";
> +
> + nuvoton,sys = <&sys 0>;
> + resets = <&sys MA35D1_RESET_GMAC0>;
> + reset-names = "stmmaceth";
> +
> + phy-mode = "rgmii-id";
> + phy-handle = <ð_phy0>;
> + mdio0: mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eth_phy0: ethernet-phy at 0 {
> + reg = <0>;
> + };
> + };
> + };
> +
> + - |
> + //Example 2
> + gmac1: ethernet at 40130000 {
Drop the example. It's almost the same as the first one.
> + compatible = "nuvoton,ma35d1-dwmac";
> + reg = <0x0 0x40130000 0x0 0x10000>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq";
> + clocks = <&clk EMAC1_GATE>, <&clk EPLL_DIV8>;
> + clock-names = "stmmaceth", "ptp_ref";
> +
> + nuvoton,sys = <&sys 1>;
> + resets = <&sys MA35D1_RESET_GMAC1>;
> + reset-names = "stmmaceth";
> +
> + phy-mode = "rmii";
> + phy-handle = <ð_phy1>;
> + mdio1: mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eth_phy1: ethernet-phy at 1 {
> + reg = <1>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 4e2ba1bf788c..aecdb3d37b53 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -66,6 +66,7 @@ properties:
> - ingenic,x2000-mac
> - loongson,ls2k-dwmac
> - loongson,ls7a-dwmac
> + - nuvoton,ma35d1-dwmac
> - qcom,qcs404-ethqos
> - qcom,sa8775p-ethqos
> - qcom,sc8280xp-ethqos
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list