[PATCH v2 03/15] media: stm32: csi: addition of the STM32 CSI driver

[Alain Volmat]

Hi Philipp

On Tue, Nov 05, 2024 at 11:14:47AM +0100, Philipp Zabel wrote:
> On Di, 2024-11-05 at 08:49 +0100, Alain Volmat wrote:
> > The STM32 CSI controller is tightly coupled with the DCMIPP and act as an
> > input stage to receive data coming from the sensor and transferring
> > them into the DCMIPP.
> > 
> > Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
> > 
> > ---
> > v2: correct data-lanes handling, using values 1 & 2
> >     update yaml filename in MAINTAINERS
> > ---
> >  MAINTAINERS                                 |    8 +
> >  drivers/media/platform/st/stm32/Kconfig     |   14 +
> >  drivers/media/platform/st/stm32/Makefile    |    1 +
> >  drivers/media/platform/st/stm32/stm32-csi.c | 1144 +++++++++++++++++++++++++++
> >  4 files changed, 1167 insertions(+)
> > 
> [...]
> > diff --git a/drivers/media/platform/st/stm32/stm32-csi.c b/drivers/media/platform/st/stm32/stm32-csi.c
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..c7f47472c6b3699e94113ce0f38b280a2e45ce15
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-csi.c
> > @@ -0,0 +1,1144 @@
> [...]
> > +static int stm32_csi_get_resources(struct stm32_csi_dev *csidev,
> > +				   struct platform_device *pdev)
> > +{
> > +	int irq, ret;
> > +
> > +	csidev->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
> > +	if (IS_ERR(csidev->base))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(csidev->base),
> > +				     "Failed to ioremap resource\n");
> > +
> > +	csidev->pclk = devm_clk_get(&pdev->dev, "pclk");
> > +	if (IS_ERR(csidev->pclk))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(csidev->pclk),
> > +				     "Couldn't get pclk\n");
> > +
> > +	csidev->txesc = devm_clk_get(&pdev->dev, "txesc");
> > +	if (IS_ERR(csidev->txesc))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(csidev->txesc),
> > +				     "Couldn't get txesc\n");
> > +
> > +	csidev->csi2phy = devm_clk_get(&pdev->dev, "csi2phy");
> > +	if (IS_ERR(csidev->csi2phy))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(csidev->csi2phy),
> > +				     "Couldn't get csi2phy\n");
> 
> Consider using devm_clk_bulk_get().

Ok, I change this in the v3.

> 
> > +	csidev->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> > +	if (IS_ERR(csidev->rstc))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(csidev->rstc),
> > +				     "Couldn't get reset control\n");
> 
> If this wasn't in a separate function, rstc wouldn't have to be stored
> on csidev as it's only ever used in stm32_csi_probe().

Ok, whole reset handling moved into the probe function.

> 
> > +
> > +	csidev->supplies[0].supply = "vdd";
> > +	csidev->supplies[1].supply = "vdda18";
> > +	ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(csidev->supplies),
> > +				      csidev->supplies);
> > +	if (ret)
> > +		return dev_err_probe(&pdev->dev, ret,
> > +				     "Failed to request regulator vdd\n");
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	if (irq < 0)
> > +		return irq;
> > +
> > +	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> > +					stm32_csi_irq_thread, IRQF_ONESHOT,
> > +					dev_name(&pdev->dev), csidev);
> > +	if (ret)
> > +		return dev_err_probe(&pdev->dev, ret,
> > +				     "Unable to request irq");
> > +
> > +	return 0;
> > +}
> 
> regards
> Philipp

Regards
Alain