[PATCH 2/5] scsi: ufs: qcom: Only free platform MSIs when ESI is enabled

[Bean Huo]

On Mon, 2024-11-11 at 23:18 +0530, Manivannan Sadhasivam via B4 Relay
wrote:
> Otherwise, it will result in a NULL pointer dereference as below:
> 
> Unable to handle kernel NULL pointer dereference at virtual address
> 0000000000000008
> Call trace:
>  mutex_lock+0xc/0x54
>  platform_device_msi_free_irqs_all+0x14/0x20
>  ufs_qcom_remove+0x34/0x48 [ufs_qcom]
>  platform_remove+0x28/0x44
>  device_remove+0x4c/0x80
>  device_release_driver_internal+0xd8/0x178
>  driver_detach+0x50/0x9c
>  bus_remove_driver+0x6c/0xbc
>  driver_unregister+0x30/0x60
>  platform_driver_unregister+0x14/0x20
>  ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom]
>  __arm64_sys_delete_module+0x180/0x260
>  invoke_syscall+0x44/0x100
>  el0_svc_common.constprop.0+0xc0/0xe0
>  do_el0_svc+0x1c/0x28
>  el0_svc+0x34/0xdc
>  el0t_64_sync_handler+0xc0/0xc4
>  el0t_64_sync+0x190/0x194
> 
> Cc: stable at vger.kernel.org # 6.3
> Fixes: 519b6274a777 ("scsi: ufs: qcom: Add MCQ ESI config vendor
> specific ops")
> Signed-off-by: Manivannan Sadhasivam
> <manivannan.sadhasivam at linaro.org>

Reviewed-by: Bean Huo <beanhuo at micron.com>